输入对象

输入对象可描述为“可组合对象”，因为它们包含一组用于定义对象的输入字段。

本文内容

关于输入对象

输入对象可描述为“可组合对象”，因为它们包含一组用于定义对象的输入字段。

例如，CommitAuthor 采用 emails 字段。为 emails 提供一个值后，可将 CommitAuthor 转换成包含电子邮件地址的 User 对象列表。注意，对象可能包含输入对象，然而，变更需要输入对象。

有关详细信息，请参阅“使用 GraphQL 建立调用”。

AbortQueuedMigrationsInput

Autogenerated input type of AbortQueuedMigrations.

输入 `AbortQueuedMigrationsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The ID of the organization that is running the migrations.

AbortRepositoryMigrationInput

Autogenerated input type of AbortRepositoryMigration.

输入 `AbortRepositoryMigrationInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`migrationId` (`ID!`)	The ID of the migration to be aborted.

AddAssigneesToAssignableInput

Autogenerated input type of AddAssigneesToAssignable.

输入 `AddAssigneesToAssignableInput` 字段

名称	说明
`assignableId` (`ID!`)	The id of the assignable object to add assignees to.
`assigneeIds` (`[ID!]!`)	The id of users to add as assignees.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.

AddCommentInput

Autogenerated input type of AddComment.

输入 `AddCommentInput` 字段

名称	说明
`body` (`String!`)	The contents of the comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`subjectId` (`ID!`)	The Node ID of the subject to modify.

AddDiscussionCommentInput

Autogenerated input type of AddDiscussionComment.

输入 `AddDiscussionCommentInput` 字段

名称	说明
`body` (`String!`)	The contents of the comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`discussionId` (`ID!`)	The Node ID of the discussion to comment on.
`replyToId` (`ID`)	The Node ID of the discussion comment within this discussion to reply to.

AddDiscussionPollVoteInput

Autogenerated input type of AddDiscussionPollVote.

输入 `AddDiscussionPollVoteInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pollOptionId` (`ID!`)	The Node ID of the discussion poll option to vote for.

AddEnterpriseAdminInput

Autogenerated input type of AddEnterpriseAdmin.

输入 `AddEnterpriseAdminInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise account to which the administrator should be added.
`login` (`String!`)	The login of the user to add as an administrator.

AddEnterpriseOrganizationMemberInput

Autogenerated input type of AddEnterpriseOrganizationMember.

输入 `AddEnterpriseOrganizationMemberInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise which owns the organization.
`organizationId` (`ID!`)	The ID of the organization the users will be added to.
`role` (`OrganizationMemberRole`)	The role to assign the users in the organization.
`userIds` (`[ID!]!`)	The IDs of the enterprise members to add.

AddLabelsToLabelableInput

Autogenerated input type of AddLabelsToLabelable.

输入 `AddLabelsToLabelableInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`labelIds` (`[ID!]!`)	The ids of the labels to add.
`labelableId` (`ID!`)	The id of the labelable object to add labels to.

AddProjectCardInput

Autogenerated input type of AddProjectCard.

输入 `AddProjectCardInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`contentId` (`ID`)	The content of the card. Must be a member of the ProjectCardItem union.
`note` (`String`)	The note on the card.
`projectColumnId` (`ID!`)	The Node ID of the ProjectColumn.

AddProjectColumnInput

Autogenerated input type of AddProjectColumn.

输入 `AddProjectColumnInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String!`)	The name of the column.
`projectId` (`ID!`)	The Node ID of the project.

AddProjectV2DraftIssueInput

Autogenerated input type of AddProjectV2DraftIssue.

输入 `AddProjectV2DraftIssueInput` 字段

名称	说明
`assigneeIds` (`[ID!]`)	The IDs of the assignees of the draft issue.
`body` (`String`)	The body of the draft issue.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to add the draft issue to.
`title` (`String!`)	The title of the draft issue. A project item can also be created by providing the URL of an Issue or Pull Request if you have access.

AddProjectV2ItemByIdInput

Autogenerated input type of AddProjectV2ItemById.

输入 `AddProjectV2ItemByIdInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`contentId` (`ID!`)	The id of the Issue or Pull Request to add.
`projectId` (`ID!`)	The ID of the Project to add the item to.

AddPullRequestReviewCommentInput

Autogenerated input type of AddPullRequestReviewComment.

输入 `AddPullRequestReviewCommentInput` 字段

名称	说明
`body` (`String`)	The text of the comment. This field is required Upcoming Change on 2023-10-01 UTC Description: `body` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`commitOID` (`GitObjectID`)	The SHA of the commit to comment on. Upcoming Change on 2023-10-01 UTC Description: `commitOID` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`inReplyTo` (`ID`)	The comment id to reply to. Upcoming Change on 2023-10-01 UTC Description: `inReplyTo` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`path` (`String`)	The relative path of the file to comment on. Upcoming Change on 2023-10-01 UTC Description: `path` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`position` (`Int`)	The line index in the diff to comment on. Upcoming Change on 2023-10-01 UTC Description: `position` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`pullRequestId` (`ID`)	The node ID of the pull request reviewing Upcoming Change on 2023-10-01 UTC Description: `pullRequestId` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.
`pullRequestReviewId` (`ID`)	The Node ID of the review to modify. Upcoming Change on 2023-10-01 UTC Description: `pullRequestReviewId` will be removed. use addPullRequestReviewThread or addPullRequestReviewThreadReply instead Reason: We are deprecating the addPullRequestReviewComment mutation.

AddPullRequestReviewInput

Autogenerated input type of AddPullRequestReview.

输入 `AddPullRequestReviewInput` 字段

名称	说明
`body` (`String`)	The contents of the review body comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`comments` (`[DraftPullRequestReviewComment]`)	The review line comments. Upcoming Change on 2023-10-01 UTC Description: `comments` will be removed. use the `threads` argument instead Reason: We are deprecating comment fields that use diff-relative positioning.
`commitOID` (`GitObjectID`)	The commit OID the review pertains to.
`event` (`PullRequestReviewEvent`)	The event to perform on the pull request review.
`pullRequestId` (`ID!`)	The Node ID of the pull request to modify.
`threads` (`[DraftPullRequestReviewThread]`)	The review line comment threads.

AddPullRequestReviewThreadInput

Autogenerated input type of AddPullRequestReviewThread.

输入 `AddPullRequestReviewThreadInput` 字段

名称	说明
`body` (`String!`)	Body of the thread's first comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`line` (`Int`)	The line of the blob to which the thread refers, required for line-level threads. The end of the line range for multi-line comments.
`path` (`String!`)	Path to the file being commented on.
`pullRequestId` (`ID`)	The node ID of the pull request reviewing.
`pullRequestReviewId` (`ID`)	The Node ID of the review to modify.
`side` (`DiffSide`)	The side of the diff on which the line resides. For multi-line comments, this is the side for the end of the line range.
`startLine` (`Int`)	The first line of the range to which the comment refers.
`startSide` (`DiffSide`)	The side of the diff on which the start line resides.
`subjectType` (`PullRequestReviewThreadSubjectType`)	The level at which the comments in the corresponding thread are targeted, can be a diff line or a file.

AddPullRequestReviewThreadReplyInput

Autogenerated input type of AddPullRequestReviewThreadReply.

输入 `AddPullRequestReviewThreadReplyInput` 字段

名称	说明
`body` (`String!`)	The text of the reply.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestReviewId` (`ID`)	The Node ID of the pending review to which the reply will belong.
`pullRequestReviewThreadId` (`ID!`)	The Node ID of the thread to which this reply is being written.

AddReactionInput

Autogenerated input type of AddReaction.

输入 `AddReactionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`content` (`ReactionContent!`)	The name of the emoji to react with.
`subjectId` (`ID!`)	The Node ID of the subject to modify.

AddStarInput

Autogenerated input type of AddStar.

输入 `AddStarInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`starrableId` (`ID!`)	The Starrable ID to star.

AddUpvoteInput

Autogenerated input type of AddUpvote.

输入 `AddUpvoteInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`subjectId` (`ID!`)	The Node ID of the discussion or comment to upvote.

AddVerifiableDomainInput

Autogenerated input type of AddVerifiableDomain.

输入 `AddVerifiableDomainInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`domain` (`URI!`)	The URL of the domain.
`ownerId` (`ID!`)	The ID of the owner to add the domain to.

ApproveDeploymentsInput

Autogenerated input type of ApproveDeployments.

输入 `ApproveDeploymentsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`comment` (`String`)	Optional comment for approving deployments.
`environmentIds` (`[ID!]!`)	The ids of environments to reject deployments.
`workflowRunId` (`ID!`)	The node ID of the workflow run containing the pending deployments.

ApproveVerifiableDomainInput

Autogenerated input type of ApproveVerifiableDomain.

输入 `ApproveVerifiableDomainInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the verifiable domain to approve.

ArchiveProjectV2ItemInput

Autogenerated input type of ArchiveProjectV2Item.

输入 `ArchiveProjectV2ItemInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The ID of the ProjectV2Item to archive.
`projectId` (`ID!`)	The ID of the Project to archive the item from.

ArchiveRepositoryInput

Autogenerated input type of ArchiveRepository.

输入 `ArchiveRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The ID of the repository to mark as archived.

AuditLogOrder

Ordering options for Audit Log connections.

输入 `AuditLogOrder` 字段

名称	说明
`direction` (`OrderDirection`)	The ordering direction.
`field` (`AuditLogOrderField`)	The field to order Audit Logs by.

BranchNamePatternParametersInput

Parameters to be used for the branch_name_pattern rule.

输入 `BranchNamePatternParametersInput` 字段

名称	说明
`name` (`String`)	How this rule will appear to users.
`negate` (`Boolean`)	If true, the rule will fail if the pattern matches.
`operator` (`String!`)	The operator to use for matching.
`pattern` (`String!`)	The pattern to match with.

ChangeUserStatusInput

Autogenerated input type of ChangeUserStatus.

输入 `ChangeUserStatusInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`emoji` (`String`)	The emoji to represent your status. Can either be a native Unicode emoji or an emoji name with colons, e.g., 😀.
`expiresAt` (`DateTime`)	If set, the user status will not be shown after this date.
`limitedAvailability` (`Boolean`)	Whether this status should indicate you are not fully available on GitHub, e.g., you are away.
`message` (`String`)	A short description of your current status.
`organizationId` (`ID`)	The ID of the organization whose members will be allowed to see the status. If omitted, the status will be publicly visible.

CheckAnnotationData

Information from a check run analysis to specific lines of code.

输入 `CheckAnnotationData` 字段

名称	说明
`annotationLevel` (`CheckAnnotationLevel!`)	Represents an annotation's information level.
`location` (`CheckAnnotationRange!`)	The location of the annotation.
`message` (`String!`)	A short description of the feedback for these lines of code.
`path` (`String!`)	The path of the file to add an annotation to.
`rawDetails` (`String`)	Details about this annotation.
`title` (`String`)	The title that represents the annotation.

CheckAnnotationRange

Information from a check run analysis to specific lines of code.

输入 `CheckAnnotationRange` 字段

名称	说明
`endColumn` (`Int`)	The ending column of the range.
`endLine` (`Int!`)	The ending line of the range.
`startColumn` (`Int`)	The starting column of the range.
`startLine` (`Int!`)	The starting line of the range.

CheckRunAction

Possible further actions the integrator can perform.

输入 `CheckRunAction` 字段

名称	说明
`description` (`String!`)	A short explanation of what this action would do.
`identifier` (`String!`)	A reference for the action on the integrator's system.
`label` (`String!`)	The text to be displayed on a button in the web UI.

CheckRunFilter

The filters that are available when fetching check runs.

输入 `CheckRunFilter` 字段

名称	说明
`appId` (`Int`)	Filters the check runs created by this application ID.
`checkName` (`String`)	Filters the check runs by this name.
`checkType` (`CheckRunType`)	Filters the check runs by this type.
`conclusions` (`[CheckConclusionState!]`)	Filters the check runs by these conclusions.
`status` (`CheckStatusState`)	Filters the check runs by this status. Superceded by statuses.
`statuses` (`[CheckStatusState!]`)	Filters the check runs by this status. Overrides status.

CheckRunOutput

Descriptive details about the check run.

输入 `CheckRunOutput` 字段

名称	说明
`annotations` (`[CheckAnnotationData!]`)	The annotations that are made as part of the check run.
`images` (`[CheckRunOutputImage!]`)	Images attached to the check run output displayed in the GitHub pull request UI.
`summary` (`String!`)	The summary of the check run (supports Commonmark).
`text` (`String`)	The details of the check run (supports Commonmark).
`title` (`String!`)	A title to provide for this check run.

CheckRunOutputImage

Images attached to the check run output displayed in the GitHub pull request UI.

输入 `CheckRunOutputImage` 字段

名称	说明
`alt` (`String!`)	The alternative text for the image.
`caption` (`String`)	A short image description.
`imageUrl` (`URI!`)	The full URL of the image.

CheckSuiteAutoTriggerPreference

The auto-trigger preferences that are available for check suites.

输入 `CheckSuiteAutoTriggerPreference` 字段

名称	说明
`appId` (`ID!`)	The node ID of the application that owns the check suite.
`setting` (`Boolean!`)	Set to `true` to enable automatic creation of CheckSuite events upon pushes to the repository.

CheckSuiteFilter

The filters that are available when fetching check suites.

输入 `CheckSuiteFilter` 字段

名称	说明
`appId` (`Int`)	Filters the check suites created by this application ID.
`checkName` (`String`)	Filters the check suites by this name.

ClearLabelsFromLabelableInput

Autogenerated input type of ClearLabelsFromLabelable.

输入 `ClearLabelsFromLabelableInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`labelableId` (`ID!`)	The id of the labelable object to clear the labels from.

ClearProjectV2ItemFieldValueInput

Autogenerated input type of ClearProjectV2ItemFieldValue.

输入 `ClearProjectV2ItemFieldValueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`fieldId` (`ID!`)	The ID of the field to be cleared.
`itemId` (`ID!`)	The ID of the item to be cleared.
`projectId` (`ID!`)	The ID of the Project.

CloneProjectInput

Autogenerated input type of CloneProject.

输入 `CloneProjectInput` 字段

名称	说明
`body` (`String`)	The description of the project.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`includeWorkflows` (`Boolean!`)	Whether or not to clone the source project's workflows.
`name` (`String!`)	The name of the project.
`public` (`Boolean`)	The visibility of the project, defaults to false (private).
`sourceId` (`ID!`)	The source project to clone.
`targetOwnerId` (`ID!`)	The owner ID to create the project under.

CloneTemplateRepositoryInput

Autogenerated input type of CloneTemplateRepository.

输入 `CloneTemplateRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	A short description of the new repository.
`includeAllBranches` (`Boolean`)	Whether to copy all branches from the template to the new repository. Defaults to copying only the default branch of the template.
`name` (`String!`)	The name of the new repository.
`ownerId` (`ID!`)	The ID of the owner for the new repository.
`repositoryId` (`ID!`)	The Node ID of the template repository.
`visibility` (`RepositoryVisibility!`)	Indicates the repository's visibility level.

CloseDiscussionInput

Autogenerated input type of CloseDiscussion.

输入 `CloseDiscussionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`discussionId` (`ID!`)	ID of the discussion to be closed.
`reason` (`DiscussionCloseReason`)	The reason why the discussion is being closed.

CloseIssueInput

Autogenerated input type of CloseIssue.

输入 `CloseIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	ID of the issue to be closed.
`stateReason` (`IssueClosedStateReason`)	The reason the issue is to be closed.

ClosePullRequestInput

Autogenerated input type of ClosePullRequest.

输入 `ClosePullRequestInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	ID of the pull request to be closed.

Choose which tools must provide code scanning results before the reference is updated. When configured, code scanning must be enabled and have results for both the commit and the reference being updated.

输入 `CodeScanningParametersInput` 字段

名称	说明
`codeScanningTools` (`[CodeScanningToolInput!]!`)	Tools that must provide code scanning results for this rule to pass.

CodeScanningToolInput

A tool that must provide code scanning results for this rule to pass.

输入 `CodeScanningToolInput` 字段

名称	说明
`alertsThreshold` (`String!`)	The severity level at which code scanning results that raise alerts block a reference update. For more information on alert severity levels, see "About code scanning alerts.".
`securityAlertsThreshold` (`String!`)	The severity level at which code scanning results that raise security alerts block a reference update. For more information on security severity levels, see "About code scanning alerts.".
`tool` (`String!`)	The name of a code scanning tool.

CommitAuthor

Specifies an author for filtering Git commits.

输入 `CommitAuthor` 字段

名称	说明
`emails` (`[String!]`)	Email addresses to filter by. Commits authored by any of the specified email addresses will be returned.
`id` (`ID`)	ID of a User to filter by. If non-null, only commits authored by this user will be returned. This field takes precedence over emails.

CommitAuthorEmailPatternParametersInput

Parameters to be used for the commit_author_email_pattern rule.

输入 `CommitAuthorEmailPatternParametersInput` 字段

名称	说明
`name` (`String`)	How this rule will appear to users.
`negate` (`Boolean`)	If true, the rule will fail if the pattern matches.
`operator` (`String!`)	The operator to use for matching.
`pattern` (`String!`)	The pattern to match with.

CommitContributionOrder

Ordering options for commit contribution connections.

输入 `CommitContributionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`CommitContributionOrderField!`)	The field by which to order commit contributions.

CommitMessage

A message to include with a new commit.

输入 `CommitMessage` 字段

名称	说明
`body` (`String`)	The body of the message.
`headline` (`String!`)	The headline of the message.

CommitMessagePatternParametersInput

Parameters to be used for the commit_message_pattern rule.

输入 `CommitMessagePatternParametersInput` 字段

名称	说明
`name` (`String`)	How this rule will appear to users.
`negate` (`Boolean`)	If true, the rule will fail if the pattern matches.
`operator` (`String!`)	The operator to use for matching.
`pattern` (`String!`)	The pattern to match with.

CommittableBranch

A git ref for a commit to be appended to.

The ref must be a branch, i.e. its fully qualified name must start with refs/heads/ (although the input is not required to be fully qualified).

The Ref may be specified by its global node ID or by the repositoryNameWithOwner and branchName.

Examples

Specify a branch using a global node ID:

{ "id": "MDM6UmVmMTpyZWZzL2hlYWRzL21haW4=" }

Specify a branch using repositoryNameWithOwner and branchName:

{
  "repositoryNameWithOwner": "github/graphql-client",
  "branchName": "main"
}.

输入 `CommittableBranch` 字段

名称	说明
`branchName` (`String`)	The unqualified name of the branch to append the commit to.
`id` (`ID`)	The Node ID of the Ref to be updated.
`repositoryNameWithOwner` (`String`)	The nameWithOwner of the repository to commit to.

CommitterEmailPatternParametersInput

Parameters to be used for the committer_email_pattern rule.

输入 `CommitterEmailPatternParametersInput` 字段

名称	说明
`name` (`String`)	How this rule will appear to users.
`negate` (`Boolean`)	If true, the rule will fail if the pattern matches.
`operator` (`String!`)	The operator to use for matching.
`pattern` (`String!`)	The pattern to match with.

ContributionOrder

Ordering options for contribution connections.

输入 `ContributionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.

ConvertProjectCardNoteToIssueInput

Autogenerated input type of ConvertProjectCardNoteToIssue.

输入 `ConvertProjectCardNoteToIssueInput` 字段

名称	说明
`body` (`String`)	The body of the newly created issue.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectCardId` (`ID!`)	The ProjectCard ID to convert.
`repositoryId` (`ID!`)	The ID of the repository to create the issue in.
`title` (`String`)	The title of the newly created issue. Defaults to the card's note text.

ConvertProjectV2DraftIssueItemToIssueInput

Autogenerated input type of ConvertProjectV2DraftIssueItemToIssue.

输入 `ConvertProjectV2DraftIssueItemToIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The ID of the draft issue ProjectV2Item to convert.
`repositoryId` (`ID!`)	The ID of the repository to create the issue in.

ConvertPullRequestToDraftInput

Autogenerated input type of ConvertPullRequestToDraft.

输入 `ConvertPullRequestToDraftInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	ID of the pull request to convert to draft.

CopyProjectV2Input

Autogenerated input type of CopyProjectV2.

输入 `CopyProjectV2Input` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`includeDraftIssues` (`Boolean`)	Include draft issues in the new project.
`ownerId` (`ID!`)	The owner ID of the new project.
`projectId` (`ID!`)	The ID of the source Project to copy.
`title` (`String!`)	The title of the project.

CreateAttributionInvitationInput

Autogenerated input type of CreateAttributionInvitation.

输入 `CreateAttributionInvitationInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The Node ID of the owner scoping the reattributable data.
`sourceId` (`ID!`)	The Node ID of the account owning the data to reattribute.
`targetId` (`ID!`)	The Node ID of the account which may claim the data.

CreateBranchProtectionRuleInput

Autogenerated input type of CreateBranchProtectionRule.

输入 `CreateBranchProtectionRuleInput` 字段

名称	说明
`allowsDeletions` (`Boolean`)	Can this branch be deleted.
`allowsForcePushes` (`Boolean`)	Are force pushes allowed on this branch.
`blocksCreations` (`Boolean`)	Is branch creation a protected operation.
`bypassForcePushActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to bypass force push targeting matching branches.
`bypassPullRequestActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to bypass pull requests targeting matching branches.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`dismissesStaleReviews` (`Boolean`)	Will new commits pushed to matching branches dismiss pull request review approvals.
`isAdminEnforced` (`Boolean`)	Can admins override branch protection.
`lockAllowsFetchAndMerge` (`Boolean`)	Whether users can pull changes from upstream when the branch is locked. Set to `true` to allow fork syncing. Set to `false` to prevent fork syncing.
`lockBranch` (`Boolean`)	Whether to set the branch as read-only. If this is true, users will not be able to push to the branch.
`pattern` (`String!`)	The glob-like pattern used to determine matching branches.
`pushActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to push to matching branches.
`repositoryId` (`ID!`)	The global relay id of the repository in which a new branch protection rule should be created in.
`requireLastPushApproval` (`Boolean`)	Whether the most recent push must be approved by someone other than the person who pushed it.
`requiredApprovingReviewCount` (`Int`)	Number of approving reviews required to update matching branches.
`requiredDeploymentEnvironments` (`[String!]`)	The list of required deployment environments.
`requiredStatusCheckContexts` (`[String!]`)	List of required status check contexts that must pass for commits to be accepted to matching branches.
`requiredStatusChecks` (`[RequiredStatusCheckInput!]`)	The list of required status checks.
`requiresApprovingReviews` (`Boolean`)	Are approving reviews required to update matching branches.
`requiresCodeOwnerReviews` (`Boolean`)	Are reviews from code owners required to update matching branches.
`requiresCommitSignatures` (`Boolean`)	Are commits required to be signed.
`requiresConversationResolution` (`Boolean`)	Are conversations required to be resolved before merging.
`requiresDeployments` (`Boolean`)	Are successful deployments required before merging.
`requiresLinearHistory` (`Boolean`)	Are merge commits prohibited from being pushed to this branch.
`requiresStatusChecks` (`Boolean`)	Are status checks required to update matching branches.
`requiresStrictStatusChecks` (`Boolean`)	Are branches required to be up to date before merging.
`restrictsPushes` (`Boolean`)	Is pushing to matching branches restricted.
`restrictsReviewDismissals` (`Boolean`)	Is dismissal of pull request reviews restricted.
`reviewDismissalActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to dismiss reviews on pull requests targeting matching branches.

CreateCheckRunInput

Autogenerated input type of CreateCheckRun.

输入 `CreateCheckRunInput` 字段

名称	说明
`actions` (`[CheckRunAction!]`)	Possible further actions the integrator can perform, which a user may trigger.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`completedAt` (`DateTime`)	The time that the check run finished.
`conclusion` (`CheckConclusionState`)	The final conclusion of the check.
`detailsUrl` (`URI`)	The URL of the integrator's site that has the full details of the check.
`externalId` (`String`)	A reference for the run on the integrator's system.
`headSha` (`GitObjectID!`)	The SHA of the head commit.
`name` (`String!`)	The name of the check.
`output` (`CheckRunOutput`)	Descriptive details about the run.
`repositoryId` (`ID!`)	The node ID of the repository.
`startedAt` (`DateTime`)	The time that the check run began.
`status` (`RequestableCheckStatusState`)	The current status.

CreateCheckSuiteInput

Autogenerated input type of CreateCheckSuite.

输入 `CreateCheckSuiteInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`headSha` (`GitObjectID!`)	The SHA of the head commit.
`repositoryId` (`ID!`)	The Node ID of the repository.

CreateCommitOnBranchInput

Autogenerated input type of CreateCommitOnBranch.

输入 `CreateCommitOnBranchInput` 字段

名称	说明
`branch` (`CommittableBranch!`)	The Ref to be updated. Must be a branch.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`expectedHeadOid` (`GitObjectID!`)	The git commit oid expected at the head of the branch prior to the commit.
`fileChanges` (`FileChanges`)	A description of changes to files in this commit.
`message` (`CommitMessage!`)	The commit message the be included with the commit.

CreateDeploymentInput

Autogenerated input type of CreateDeployment.

输入 `CreateDeploymentInput` 字段

名称	说明
`autoMerge` (`Boolean`)	Attempt to automatically merge the default branch into the requested ref, defaults to true.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	Short description of the deployment.
`environment` (`String`)	Name for the target deployment environment.
`payload` (`String`)	JSON payload with extra information about the deployment.
`refId` (`ID!`)	The node ID of the ref to be deployed.
`repositoryId` (`ID!`)	The node ID of the repository.
`requiredContexts` (`[String!]`)	The status contexts to verify against commit status checks. To bypass required contexts, pass an empty array. Defaults to all unique contexts.
`task` (`String`)	Specifies a task to execute.

CreateDeploymentStatusInput

Autogenerated input type of CreateDeploymentStatus.

输入 `CreateDeploymentStatusInput` 字段

名称	说明
`autoInactive` (`Boolean`)	Adds a new inactive status to all non-transient, non-production environment deployments with the same repository and environment name as the created status's deployment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`deploymentId` (`ID!`)	The node ID of the deployment.
`description` (`String`)	A short description of the status. Maximum length of 140 characters.
`environment` (`String`)	If provided, updates the environment of the deploy. Otherwise, does not modify the environment.
`environmentUrl` (`String`)	Sets the URL for accessing your environment.
`logUrl` (`String`)	The log URL to associate with this status. This URL should contain output to keep the user updated while the task is running or serve as historical information for what happened in the deployment.
`state` (`DeploymentStatusState!`)	The state of the deployment.

CreateDiscussionInput

Autogenerated input type of CreateDiscussion.

输入 `CreateDiscussionInput` 字段

名称	说明
`body` (`String!`)	The body of the discussion.
`categoryId` (`ID!`)	The id of the discussion category to associate with this discussion.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The id of the repository on which to create the discussion.
`title` (`String!`)	The title of the discussion.

CreateEnterpriseOrganizationInput

Autogenerated input type of CreateEnterpriseOrganization.

输入 `CreateEnterpriseOrganizationInput` 字段

名称	说明
`adminLogins` (`[String!]!`)	The logins for the administrators of the new organization.
`billingEmail` (`String!`)	The email used for sending billing receipts.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise owning the new organization.
`login` (`String!`)	The login of the new organization.
`profileName` (`String!`)	The profile name of the new organization.

CreateEnvironmentInput

Autogenerated input type of CreateEnvironment.

输入 `CreateEnvironmentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String!`)	The name of the environment.
`repositoryId` (`ID!`)	The node ID of the repository.

CreateIpAllowListEntryInput

Autogenerated input type of CreateIpAllowListEntry.

输入 `CreateIpAllowListEntryInput` 字段

名称	说明
`allowListValue` (`String!`)	An IP address or range of addresses in CIDR notation.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`isActive` (`Boolean!`)	Whether the IP allow list entry is active when an IP allow list is enabled.
`name` (`String`)	An optional name for the IP allow list entry.
`ownerId` (`ID!`)	The ID of the owner for which to create the new IP allow list entry.

CreateIssueInput

Autogenerated input type of CreateIssue.

输入 `CreateIssueInput` 字段

名称	说明
`assigneeIds` (`[ID!]`)	The Node ID for the user assignee for this issue.
`body` (`String`)	The body for the issue description.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueTemplate` (`String`)	The name of an issue template in the repository, assigns labels and assignees from the template to the issue.
`labelIds` (`[ID!]`)	An array of Node IDs of labels for this issue.
`milestoneId` (`ID`)	The Node ID of the milestone for this issue.
`projectIds` (`[ID!]`)	An array of Node IDs for projects associated with this issue.
`repositoryId` (`ID!`)	The Node ID of the repository.
`title` (`String!`)	The title for the issue.

CreateLabelInput

Autogenerated input type of CreateLabel.

输入 `CreateLabelInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`color` (`String!`)	A 6 character hex code, without the leading #, identifying the color of the label.
`description` (`String`)	A brief description of the label, such as its purpose.
`name` (`String!`)	The name of the label.
`repositoryId` (`ID!`)	The Node ID of the repository.

CreateLinkedBranchInput

Autogenerated input type of CreateLinkedBranch.

输入 `CreateLinkedBranchInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	ID of the issue to link to.
`name` (`String`)	The name of the new branch. Defaults to issue number and title.
`oid` (`GitObjectID!`)	The commit SHA to base the new branch on.
`repositoryId` (`ID`)	ID of the repository to create the branch in. Defaults to the issue repository.

CreateMigrationSourceInput

Autogenerated input type of CreateMigrationSource.

输入 `CreateMigrationSourceInput` 字段

名称	说明
`accessToken` (`String`)	The migration source access token.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`githubPat` (`String`)	The GitHub personal access token of the user importing to the target repository.
`name` (`String!`)	The migration source name.
`ownerId` (`ID!`)	The ID of the organization that will own the migration source.
`type` (`MigrationSourceType!`)	The migration source type.
`url` (`String`)	The migration source URL, for example `https://github.com` or `https://monalisa.ghe.com`.

CreateProjectInput

Autogenerated input type of CreateProject.

输入 `CreateProjectInput` 字段

名称	说明
`body` (`String`)	The description of project.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String!`)	The name of project.
`ownerId` (`ID!`)	The owner ID to create the project under.
`repositoryIds` (`[ID!]`)	A list of repository IDs to create as linked repositories for the project.
`template` (`ProjectTemplate`)	The name of the GitHub-provided template.

CreateProjectV2FieldInput

Autogenerated input type of CreateProjectV2Field.

输入 `CreateProjectV2FieldInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`dataType` (`ProjectV2CustomFieldType!`)	The data type of the field.
`name` (`String!`)	The name of the field.
`projectId` (`ID!`)	The ID of the Project to create the field in.
`singleSelectOptions` (`[ProjectV2SingleSelectFieldOptionInput!]`)	Options for a single select field. At least one value is required if data_type is SINGLE_SELECT.

CreateProjectV2Input

Autogenerated input type of CreateProjectV2.

输入 `CreateProjectV2Input` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The owner ID to create the project under.
`repositoryId` (`ID`)	The repository to link the project to.
`teamId` (`ID`)	The team to link the project to. The team will be granted read permissions.
`title` (`String!`)	The title of the project.

CreateProjectV2StatusUpdateInput

Autogenerated input type of CreateProjectV2StatusUpdate.

输入 `CreateProjectV2StatusUpdateInput` 字段

名称	说明
`body` (`String`)	The body of the status update.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to create the status update in.
`startDate` (`Date`)	The start date of the status update.
`status` (`ProjectV2StatusUpdateStatus`)	The status of the status update.
`targetDate` (`Date`)	The target date of the status update.

CreatePullRequestInput

Autogenerated input type of CreatePullRequest.

输入 `CreatePullRequestInput` 字段

名称	说明
`baseRefName` (`String!`)	The name of the branch you want your changes pulled into. This should be an existing branch on the current repository. You cannot update the base branch on a pull request to point to another repository.
`body` (`String`)	The contents of the pull request.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`draft` (`Boolean`)	Indicates whether this pull request should be a draft.
`headRefName` (`String!`)	The name of the branch where your changes are implemented. For cross-repository pull requests in the same network, namespace `head_ref_name` with a user like this: `username:branch`.
`headRepositoryId` (`ID`)	The Node ID of the head repository.
`maintainerCanModify` (`Boolean`)	Indicates whether maintainers can modify the pull request.
`repositoryId` (`ID!`)	The Node ID of the repository.
`title` (`String!`)	The title of the pull request.

CreateRefInput

Autogenerated input type of CreateRef.

输入 `CreateRefInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String!`)	The fully qualified name of the new Ref (ie: `refs/heads/my_new_branch`).
`oid` (`GitObjectID!`)	The GitObjectID that the new Ref shall target. Must point to a commit.
`repositoryId` (`ID!`)	The Node ID of the Repository to create the Ref in.

CreateRepositoryInput

Autogenerated input type of CreateRepository.

输入 `CreateRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	A short description of the new repository.
`hasIssuesEnabled` (`Boolean`)	Indicates if the repository should have the issues feature enabled.
`hasWikiEnabled` (`Boolean`)	Indicates if the repository should have the wiki feature enabled.
`homepageUrl` (`URI`)	The URL for a web page about this repository.
`name` (`String!`)	The name of the new repository.
`ownerId` (`ID`)	The ID of the owner for the new repository.
`teamId` (`ID`)	When an organization is specified as the owner, this ID identifies the team that should be granted access to the new repository.
`template` (`Boolean`)	Whether this repository should be marked as a template such that anyone who can access it can create new repositories with the same files and directory structure.
`visibility` (`RepositoryVisibility!`)	Indicates the repository's visibility level.

CreateRepositoryRulesetInput

Autogenerated input type of CreateRepositoryRuleset.

输入 `CreateRepositoryRulesetInput` 字段

名称	说明
`bypassActors` (`[RepositoryRulesetBypassActorInput!]`)	A list of actors that are allowed to bypass rules in this ruleset.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`conditions` (`RepositoryRuleConditionsInput!`)	The set of conditions for this ruleset.
`enforcement` (`RuleEnforcement!`)	The enforcement level for this ruleset.
`name` (`String!`)	The name of the ruleset.
`rules` (`[RepositoryRuleInput!]`)	The list of rules for this ruleset.
`sourceId` (`ID!`)	The global relay id of the source in which a new ruleset should be created in.
`target` (`RepositoryRulesetTarget`)	The target of the ruleset.

CreateTeamDiscussionCommentInput

Autogenerated input type of CreateTeamDiscussionComment.

输入 `CreateTeamDiscussionCommentInput` 字段

名称	说明
`body` (`String`)	The content of the comment. This field is required. Upcoming Change on 2024-07-01 UTC Description: `body` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`discussionId` (`ID`)	The ID of the discussion to which the comment belongs. This field is required. Upcoming Change on 2024-07-01 UTC Description: `discussionId` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.

CreateTeamDiscussionInput

Autogenerated input type of CreateTeamDiscussion.

输入 `CreateTeamDiscussionInput` 字段

名称	说明
`body` (`String`)	The content of the discussion. This field is required. Upcoming Change on 2024-07-01 UTC Description: `body` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`private` (`Boolean`)	If true, restricts the visibility of this discussion to team members and organization owners. If false or not specified, allows any organization member to view this discussion. Upcoming Change on 2024-07-01 UTC Description: `private` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.
`teamId` (`ID`)	The ID of the team to which the discussion belongs. This field is required. Upcoming Change on 2024-07-01 UTC Description: `teamId` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.
`title` (`String`)	The title of the discussion. This field is required. Upcoming Change on 2024-07-01 UTC Description: `title` will be removed. Follow the guide at https://github.blog/changelog/2023-02-08-sunset-notice-team-discussions/ to find a suitable replacement. Reason: The Team Discussions feature is deprecated in favor of Organization Discussions.

CreateUserListInput

Autogenerated input type of CreateUserList.

输入 `CreateUserListInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	A description of the list.
`isPrivate` (`Boolean`)	Whether or not the list is private.
`name` (`String!`)	The name of the new list.

DeleteBranchProtectionRuleInput

Autogenerated input type of DeleteBranchProtectionRule.

输入 `DeleteBranchProtectionRuleInput` 字段

名称	说明
`branchProtectionRuleId` (`ID!`)	The global relay id of the branch protection rule to be deleted.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.

DeleteDeploymentInput

Autogenerated input type of DeleteDeployment.

输入 `DeleteDeploymentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the deployment to be deleted.

DeleteDiscussionCommentInput

Autogenerated input type of DeleteDiscussionComment.

输入 `DeleteDiscussionCommentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node id of the discussion comment to delete.

DeleteDiscussionInput

Autogenerated input type of DeleteDiscussion.

输入 `DeleteDiscussionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The id of the discussion to delete.

DeleteEnvironmentInput

Autogenerated input type of DeleteEnvironment.

输入 `DeleteEnvironmentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the environment to be deleted.

DeleteIpAllowListEntryInput

Autogenerated input type of DeleteIpAllowListEntry.

输入 `DeleteIpAllowListEntryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ipAllowListEntryId` (`ID!`)	The ID of the IP allow list entry to delete.

DeleteIssueCommentInput

Autogenerated input type of DeleteIssueComment.

输入 `DeleteIssueCommentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the comment to delete.

DeleteIssueInput

Autogenerated input type of DeleteIssue.

输入 `DeleteIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	The ID of the issue to delete.

DeleteLabelInput

Autogenerated input type of DeleteLabel.

输入 `DeleteLabelInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the label to be deleted.

DeleteLinkedBranchInput

Autogenerated input type of DeleteLinkedBranch.

输入 `DeleteLinkedBranchInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`linkedBranchId` (`ID!`)	The ID of the linked branch.

DeletePackageVersionInput

Autogenerated input type of DeletePackageVersion.

输入 `DeletePackageVersionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`packageVersionId` (`ID!`)	The ID of the package version to be deleted.

DeleteProjectCardInput

Autogenerated input type of DeleteProjectCard.

输入 `DeleteProjectCardInput` 字段

名称	说明
`cardId` (`ID!`)	The id of the card to delete.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.

DeleteProjectColumnInput

Autogenerated input type of DeleteProjectColumn.

输入 `DeleteProjectColumnInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`columnId` (`ID!`)	The id of the column to delete.

DeleteProjectInput

Autogenerated input type of DeleteProject.

输入 `DeleteProjectInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The Project ID to update.

DeleteProjectV2FieldInput

Autogenerated input type of DeleteProjectV2Field.

输入 `DeleteProjectV2FieldInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`fieldId` (`ID!`)	The ID of the field to delete.

DeleteProjectV2Input

Autogenerated input type of DeleteProjectV2.

输入 `DeleteProjectV2Input` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to delete.

DeleteProjectV2ItemInput

Autogenerated input type of DeleteProjectV2Item.

输入 `DeleteProjectV2ItemInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The ID of the item to be removed.
`projectId` (`ID!`)	The ID of the Project from which the item should be removed.

DeleteProjectV2StatusUpdateInput

Autogenerated input type of DeleteProjectV2StatusUpdate.

输入 `DeleteProjectV2StatusUpdateInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`statusUpdateId` (`ID!`)	The ID of the status update to be removed.

DeleteProjectV2WorkflowInput

Autogenerated input type of DeleteProjectV2Workflow.

输入 `DeleteProjectV2WorkflowInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`workflowId` (`ID!`)	The ID of the workflow to be removed.

DeletePullRequestReviewCommentInput

Autogenerated input type of DeletePullRequestReviewComment.

输入 `DeletePullRequestReviewCommentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the comment to delete.

DeletePullRequestReviewInput

Autogenerated input type of DeletePullRequestReview.

输入 `DeletePullRequestReviewInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestReviewId` (`ID!`)	The Node ID of the pull request review to delete.

DeleteRefInput

Autogenerated input type of DeleteRef.

输入 `DeleteRefInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`refId` (`ID!`)	The Node ID of the Ref to be deleted.

DeleteRepositoryRulesetInput

Autogenerated input type of DeleteRepositoryRuleset.

输入 `DeleteRepositoryRulesetInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryRulesetId` (`ID!`)	The global relay id of the repository ruleset to be deleted.

DeleteTeamDiscussionCommentInput

Autogenerated input type of DeleteTeamDiscussionComment.

输入 `DeleteTeamDiscussionCommentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the comment to delete.

DeleteTeamDiscussionInput

Autogenerated input type of DeleteTeamDiscussion.

输入 `DeleteTeamDiscussionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The discussion ID to delete.

DeleteUserListInput

Autogenerated input type of DeleteUserList.

输入 `DeleteUserListInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`listId` (`ID!`)	The ID of the list to delete.

DeleteVerifiableDomainInput

Autogenerated input type of DeleteVerifiableDomain.

输入 `DeleteVerifiableDomainInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the verifiable domain to delete.

DeploymentOrder

Ordering options for deployment connections.

输入 `DeploymentOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`DeploymentOrderField!`)	The field to order deployments by.

DequeuePullRequestInput

Autogenerated input type of DequeuePullRequest.

输入 `DequeuePullRequestInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the pull request to be dequeued.

DisablePullRequestAutoMergeInput

Autogenerated input type of DisablePullRequestAutoMerge.

输入 `DisablePullRequestAutoMergeInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	ID of the pull request to disable auto merge on.

DiscussionOrder

Ways in which lists of discussions can be ordered upon return.

输入 `DiscussionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order discussions by the specified field.
`field` (`DiscussionOrderField!`)	The field by which to order discussions.

DiscussionPollOptionOrder

Ordering options for discussion poll option connections.

输入 `DiscussionPollOptionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`DiscussionPollOptionOrderField!`)	The field to order poll options by.

DismissPullRequestReviewInput

Autogenerated input type of DismissPullRequestReview.

输入 `DismissPullRequestReviewInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`message` (`String!`)	The contents of the pull request review dismissal message.
`pullRequestReviewId` (`ID!`)	The Node ID of the pull request review to modify.

DismissRepositoryVulnerabilityAlertInput

Autogenerated input type of DismissRepositoryVulnerabilityAlert.

输入 `DismissRepositoryVulnerabilityAlertInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`dismissReason` (`DismissReason!`)	The reason the Dependabot alert is being dismissed.
`repositoryVulnerabilityAlertId` (`ID!`)	The Dependabot alert ID to dismiss.

DraftPullRequestReviewComment

Specifies a review comment to be left with a Pull Request Review.

输入 `DraftPullRequestReviewComment` 字段

名称	说明
`body` (`String!`)	Body of the comment to leave.
`path` (`String!`)	Path to the file being commented on.
`position` (`Int!`)	Position in the file to leave a comment on.

DraftPullRequestReviewThread

Specifies a review comment thread to be left with a Pull Request Review.

输入 `DraftPullRequestReviewThread` 字段

名称	说明
`body` (`String!`)	Body of the comment to leave.
`line` (`Int!`)	The line of the blob to which the thread refers. The end of the line range for multi-line comments.
`path` (`String!`)	Path to the file being commented on.
`side` (`DiffSide`)	The side of the diff on which the line resides. For multi-line comments, this is the side for the end of the line range.
`startLine` (`Int`)	The first line of the range to which the comment refers.
`startSide` (`DiffSide`)	The side of the diff on which the start line resides.

EnablePullRequestAutoMergeInput

Autogenerated input type of EnablePullRequestAutoMerge.

输入 `EnablePullRequestAutoMergeInput` 字段

名称	说明
`authorEmail` (`String`)	The email address to associate with this merge.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`commitBody` (`String`)	Commit body to use for the commit when the PR is mergable; if omitted, a default message will be used. NOTE: when merging with a merge queue any input value for commit message is ignored.
`commitHeadline` (`String`)	Commit headline to use for the commit when the PR is mergable; if omitted, a default message will be used. NOTE: when merging with a merge queue any input value for commit headline is ignored.
`expectedHeadOid` (`GitObjectID`)	The expected head OID of the pull request.
`mergeMethod` (`PullRequestMergeMethod`)	The merge method to use. If omitted, defaults to `MERGE`. NOTE: when merging with a merge queue any input value for merge method is ignored.
`pullRequestId` (`ID!`)	ID of the pull request to enable auto-merge on.

EnqueuePullRequestInput

Autogenerated input type of EnqueuePullRequest.

输入 `EnqueuePullRequestInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`expectedHeadOid` (`GitObjectID`)	The expected head OID of the pull request.
`jump` (`Boolean`)	Add the pull request to the front of the queue.
`pullRequestId` (`ID!`)	The ID of the pull request to enqueue.

EnterpriseAdministratorInvitationOrder

Ordering options for enterprise administrator invitation connections.

输入 `EnterpriseAdministratorInvitationOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseAdministratorInvitationOrderField!`)	The field to order enterprise administrator invitations by.

EnterpriseMemberOrder

Ordering options for enterprise member connections.

输入 `EnterpriseMemberOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseMemberOrderField!`)	The field to order enterprise members by.

EnterpriseOrder

Ordering options for enterprises.

输入 `EnterpriseOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseOrderField!`)	The field to order enterprises by.

EnterpriseServerInstallationOrder

Ordering options for Enterprise Server installation connections.

输入 `EnterpriseServerInstallationOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseServerInstallationOrderField!`)	The field to order Enterprise Server installations by.

EnterpriseServerUserAccountEmailOrder

Ordering options for Enterprise Server user account email connections.

输入 `EnterpriseServerUserAccountEmailOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseServerUserAccountEmailOrderField!`)	The field to order emails by.

EnterpriseServerUserAccountOrder

Ordering options for Enterprise Server user account connections.

输入 `EnterpriseServerUserAccountOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseServerUserAccountOrderField!`)	The field to order user accounts by.

EnterpriseServerUserAccountsUploadOrder

Ordering options for Enterprise Server user accounts upload connections.

输入 `EnterpriseServerUserAccountsUploadOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`EnterpriseServerUserAccountsUploadOrderField!`)	The field to order user accounts uploads by.

Environments

Ordering options for environments.

输入 `Environments` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order environments by the specified field.
`field` (`EnvironmentOrderField!`)	The field to order environments by.

FileAddition

A command to add a file at the given path with the given contents as part of a commit. Any existing file at that that path will be replaced.

输入 `FileAddition` 字段

名称	说明
`contents` (`Base64String!`)	The base64 encoded contents of the file.
`path` (`String!`)	The path in the repository where the file will be located.

FileChanges

A description of a set of changes to a file tree to be made as part of a git commit, modeled as zero or more file additions and zero or more file deletions.

Both fields are optional; omitting both will produce a commit with no file changes.

deletions and additions describe changes to files identified by their path in the git tree using unix-style path separators, i.e. /. The root of a git tree is an empty string, so paths are not slash-prefixed.

path values must be unique across all additions and deletions provided. Any duplication will result in a validation error.

Encoding

File contents must be provided in full for each FileAddition.

The contents of a FileAddition must be encoded using RFC 4648 compliant base64, i.e. correct padding is required and no characters outside the standard alphabet may be used. Invalid base64 encoding will be rejected with a validation error.

The encoded contents may be binary.

For text files, no assumptions are made about the character encoding of the file contents (after base64 decoding). No charset transcoding or line-ending normalization will be performed; it is the client's responsibility to manage the character encoding of files they provide. However, for maximum compatibility we recommend using UTF-8 encoding and ensuring that all files in a repository use a consistent line-ending convention (\n or \r\n), and that all files end with a newline.

Modeling file changes

Each of the the five types of conceptual changes that can be made in a git commit can be described using the FileChanges type as follows:

New file addition: create file hello world\n at path docs/README.txt:

{
  "additions" [
    {
      "path": "docs/README.txt",
      "contents": base64encode("hello world\n")
    }
  ]
}

Existing file modification: change existing docs/README.txt to have new content new content here\n:

{
  "additions" [
    {
      "path": "docs/README.txt",
      "contents": base64encode("new content here\n")
    }
  ]
}

Existing file deletion: remove existing file docs/README.txt. Note that the path is required to exist -- specifying a path that does not exist on the given branch will abort the commit and return an error.
```
{
  "deletions" [
    {
      "path": "docs/README.txt"
    }
  ]
}
```

File rename with no changes: rename docs/README.txt with previous content hello world\n to the same content at newdocs/README.txt:

{
  "deletions" [
    {
      "path": "docs/README.txt",
    }
  ],
  "additions" [
    {
      "path": "newdocs/README.txt",
      "contents": base64encode("hello world\n")
    }
  ]
}

File rename with changes: rename docs/README.txt with previous content hello world\n to a file at path newdocs/README.txt with content new contents\n:

{
  "deletions" [
    {
      "path": "docs/README.txt",
    }
  ],
  "additions" [
    {
      "path": "newdocs/README.txt",
      "contents": base64encode("new contents\n")
    }
  ]
}.

输入 `FileChanges` 字段

名称	说明
`additions` (`[FileAddition!]`)	File to add or change.
`deletions` (`[FileDeletion!]`)	Files to delete.

FileDeletion

A command to delete the file at the given path as part of a commit.

输入 `FileDeletion` 字段

名称	说明
`path` (`String!`)	The path to delete.

FileExtensionRestrictionParametersInput

Prevent commits that include files with specified file extensions from being pushed to the commit graph. NOTE: This rule is in beta and subject to change.

输入 `FileExtensionRestrictionParametersInput` 字段

名称	说明
`restrictedFileExtensions` (`[String!]!`)	The file extensions that are restricted from being pushed to the commit graph.

FilePathRestrictionParametersInput

Prevent commits that include changes in specified file paths from being pushed to the commit graph. NOTE: This rule is in beta and subject to change.

输入 `FilePathRestrictionParametersInput` 字段

名称	说明
`restrictedFilePaths` (`[String!]!`)	The file paths that are restricted from being pushed to the commit graph.

FollowOrganizationInput

Autogenerated input type of FollowOrganization.

输入 `FollowOrganizationInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	ID of the organization to follow.

FollowUserInput

Autogenerated input type of FollowUser.

输入 `FollowUserInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`userId` (`ID!`)	ID of the user to follow.

GistOrder

Ordering options for gist connections.

输入 `GistOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`GistOrderField!`)	The field to order repositories by.

GrantEnterpriseOrganizationsMigratorRoleInput

Autogenerated input type of GrantEnterpriseOrganizationsMigratorRole.

输入 `GrantEnterpriseOrganizationsMigratorRoleInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise to which all organizations managed by it will be granted the migrator role.
`login` (`String!`)	The login of the user to grant the migrator role.

GrantMigratorRoleInput

Autogenerated input type of GrantMigratorRole.

输入 `GrantMigratorRoleInput` 字段

名称	说明
`actor` (`String!`)	The user login or Team slug to grant the migrator role.
`actorType` (`ActorType!`)	Specifies the type of the actor, can be either USER or TEAM.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	The ID of the organization that the user/team belongs to.

ImportProjectInput

Autogenerated input type of ImportProject.

输入 `ImportProjectInput` 字段

名称	说明
`body` (`String`)	The description of Project.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`columnImports` (`[ProjectColumnImport!]!`)	A list of columns containing issues and pull requests.
`name` (`String!`)	The name of Project.
`ownerName` (`String!`)	The name of the Organization or User to create the Project under.
`public` (`Boolean`)	Whether the Project is public or not.

IpAllowListEntryOrder

Ordering options for IP allow list entry connections.

输入 `IpAllowListEntryOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`IpAllowListEntryOrderField!`)	The field to order IP allow list entries by.

IssueCommentOrder

Ways in which lists of issue comments can be ordered upon return.

输入 `IssueCommentOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order issue comments by the specified field.
`field` (`IssueCommentOrderField!`)	The field in which to order issue comments by.

IssueFilters

Ways in which to filter lists of issues.

输入 `IssueFilters` 字段

名称	说明
`assignee` (`String`)	List issues assigned to given name. Pass in `null` for issues with no assigned user, and `*` for issues assigned to any user.
`createdBy` (`String`)	List issues created by given name.
`labels` (`[String!]`)	List issues where the list of label names exist on the issue.
`mentioned` (`String`)	List issues where the given name is mentioned in the issue.
`milestone` (`String`)	List issues by given milestone argument. If an string representation of an integer is passed, it should refer to a milestone by its database ID. Pass in `null` for issues with no milestone, and `*` for issues that are assigned to any milestone.
`milestoneNumber` (`String`)	List issues by given milestone argument. If an string representation of an integer is passed, it should refer to a milestone by its number field. Pass in `null` for issues with no milestone, and `*` for issues that are assigned to any milestone.
`since` (`DateTime`)	List issues that have been updated at or after the given date.
`states` (`[IssueState!]`)	List issues filtered by the list of states given.
`viewerSubscribed` (`Boolean`)	List issues subscribed to by viewer.

IssueOrder

Ways in which lists of issues can be ordered upon return.

输入 `IssueOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order issues by the specified field.
`field` (`IssueOrderField!`)	The field in which to order issues by.

LabelOrder

Ways in which lists of labels can be ordered upon return.

输入 `LabelOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order labels by the specified field.
`field` (`LabelOrderField!`)	The field in which to order labels by.

LanguageOrder

Ordering options for language connections.

输入 `LanguageOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`LanguageOrderField!`)	The field to order languages by.

LinkProjectV2ToRepositoryInput

Autogenerated input type of LinkProjectV2ToRepository.

输入 `LinkProjectV2ToRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the project to link to the repository.
`repositoryId` (`ID!`)	The ID of the repository to link to the project.

LinkProjectV2ToTeamInput

Autogenerated input type of LinkProjectV2ToTeam.

输入 `LinkProjectV2ToTeamInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the project to link to the team.
`teamId` (`ID!`)	The ID of the team to link to the project.

LinkRepositoryToProjectInput

Autogenerated input type of LinkRepositoryToProject.

输入 `LinkRepositoryToProjectInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to link to a Repository.
`repositoryId` (`ID!`)	The ID of the Repository to link to a Project.

LockLockableInput

Autogenerated input type of LockLockable.

输入 `LockLockableInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`lockReason` (`LockReason`)	A reason for why the item will be locked.
`lockableId` (`ID!`)	ID of the item to be locked.

MannequinOrder

Ordering options for mannequins.

输入 `MannequinOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`MannequinOrderField!`)	The field to order mannequins by.

MarkDiscussionCommentAsAnswerInput

Autogenerated input type of MarkDiscussionCommentAsAnswer.

输入 `MarkDiscussionCommentAsAnswerInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the discussion comment to mark as an answer.

MarkFileAsViewedInput

Autogenerated input type of MarkFileAsViewed.

输入 `MarkFileAsViewedInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`path` (`String!`)	The path of the file to mark as viewed.
`pullRequestId` (`ID!`)	The Node ID of the pull request.

MarkNotificationAsDoneInput

Autogenerated input type of MarkNotificationAsDone.

输入 `MarkNotificationAsDoneInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The NotificationThread id.

MarkProjectV2AsTemplateInput

Autogenerated input type of MarkProjectV2AsTemplate.

输入 `MarkProjectV2AsTemplateInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to mark as a template.

MarkPullRequestReadyForReviewInput

Autogenerated input type of MarkPullRequestReadyForReview.

输入 `MarkPullRequestReadyForReviewInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	ID of the pull request to be marked as ready for review.

MaxFilePathLengthParametersInput

Prevent commits that include file paths that exceed a specified character limit from being pushed to the commit graph. NOTE: This rule is in beta and subject to change.

输入 `MaxFilePathLengthParametersInput` 字段

名称	说明
`maxFilePathLength` (`Int!`)	The maximum amount of characters allowed in file paths.

MaxFileSizeParametersInput

Prevent commits that exceed a specified file size limit from being pushed to the commit. NOTE: This rule is in beta and subject to change.

输入 `MaxFileSizeParametersInput` 字段

名称	说明
`maxFileSize` (`Int!`)	The maximum file size allowed in megabytes. This limit does not apply to Git Large File Storage (Git LFS).

MergeBranchInput

Autogenerated input type of MergeBranch.

输入 `MergeBranchInput` 字段

名称	说明
`base` (`String!`)	The name of the base branch that the provided head will be merged into.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`commitMessage` (`String`)	Message to use for the merge commit. If omitted, a default will be used.
`head` (`String!`)	The head to merge into the base branch. This can be a branch name or a commit GitObjectID.
`repositoryId` (`ID!`)	The Node ID of the Repository containing the base branch that will be modified.

MergePullRequestInput

Autogenerated input type of MergePullRequest.

输入 `MergePullRequestInput` 字段

名称	说明
`authorEmail` (`String`)	The email address to associate with this merge.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`commitBody` (`String`)	Commit body to use for the merge commit; if omitted, a default message will be used.
`commitHeadline` (`String`)	Commit headline to use for the merge commit; if omitted, a default message will be used.
`expectedHeadOid` (`GitObjectID`)	OID that the pull request head ref must match to allow merge; if omitted, no check is performed.
`mergeMethod` (`PullRequestMergeMethod`)	The merge method to use. If omitted, defaults to 'MERGE'.
`pullRequestId` (`ID!`)	ID of the pull request to be merged.

MergeQueueParametersInput

Merges must be performed via a merge queue.

输入 `MergeQueueParametersInput` 字段

名称	说明
`checkResponseTimeoutMinutes` (`Int!`)	Maximum time for a required status check to report a conclusion. After this much time has elapsed, checks that have not reported a conclusion will be assumed to have failed.
`groupingStrategy` (`MergeQueueGroupingStrategy!`)	When set to ALLGREEN, the merge commit created by merge queue for each PR in the group must pass all required checks to merge. When set to HEADGREEN, only the commit at the head of the merge group, i.e. the commit containing changes from all of the PRs in the group, must pass its required checks to merge.
`maxEntriesToBuild` (`Int!`)	Limit the number of queued pull requests requesting checks and workflow runs at the same time.
`maxEntriesToMerge` (`Int!`)	The maximum number of PRs that will be merged together in a group.
`mergeMethod` (`MergeQueueMergeMethod!`)	Method to use when merging changes from queued pull requests.
`minEntriesToMerge` (`Int!`)	The minimum number of PRs that will be merged together in a group.
`minEntriesToMergeWaitMinutes` (`Int!`)	The time merge queue should wait after the first PR is added to the queue for the minimum group size to be met. After this time has elapsed, the minimum group size will be ignored and a smaller group will be merged.

MilestoneOrder

Ordering options for milestone connections.

输入 `MilestoneOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`MilestoneOrderField!`)	The field to order milestones by.

MinimizeCommentInput

Autogenerated input type of MinimizeComment.

输入 `MinimizeCommentInput` 字段

名称	说明
`classifier` (`ReportedContentClassifiers!`)	The classification of comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`subjectId` (`ID!`)	The Node ID of the subject to modify.

MoveProjectCardInput

Autogenerated input type of MoveProjectCard.

输入 `MoveProjectCardInput` 字段

名称	说明
`afterCardId` (`ID`)	Place the new card after the card with this id. Pass null to place it at the top.
`cardId` (`ID!`)	The id of the card to move.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`columnId` (`ID!`)	The id of the column to move it into.

MoveProjectColumnInput

Autogenerated input type of MoveProjectColumn.

输入 `MoveProjectColumnInput` 字段

名称	说明
`afterColumnId` (`ID`)	Place the new column after the column with this id. Pass null to place it at the front.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`columnId` (`ID!`)	The id of the column to move.

OrgEnterpriseOwnerOrder

Ordering options for an organization's enterprise owner connections.

输入 `OrgEnterpriseOwnerOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`OrgEnterpriseOwnerOrderField!`)	The field to order enterprise owners by.

OrganizationOrder

Ordering options for organization connections.

输入 `OrganizationOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`OrganizationOrderField!`)	The field to order organizations by.

PackageFileOrder

Ways in which lists of package files can be ordered upon return.

输入 `PackageFileOrder` 字段

名称	说明
`direction` (`OrderDirection`)	The direction in which to order package files by the specified field.
`field` (`PackageFileOrderField`)	The field in which to order package files by.

PackageOrder

Ways in which lists of packages can be ordered upon return.

输入 `PackageOrder` 字段

名称	说明
`direction` (`OrderDirection`)	The direction in which to order packages by the specified field.
`field` (`PackageOrderField`)	The field in which to order packages by.

PackageVersionOrder

Ways in which lists of package versions can be ordered upon return.

输入 `PackageVersionOrder` 字段

名称	说明
`direction` (`OrderDirection`)	The direction in which to order package versions by the specified field.
`field` (`PackageVersionOrderField`)	The field in which to order package versions by.

PinEnvironmentInput

Autogenerated input type of PinEnvironment.

输入 `PinEnvironmentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`environmentId` (`ID!`)	The ID of the environment to modify.
`pinned` (`Boolean!`)	The desired state of the environment. If true, environment will be pinned. If false, it will be unpinned.

PinIssueInput

Autogenerated input type of PinIssue.

输入 `PinIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	The ID of the issue to be pinned.

PinnedEnvironmentOrder

Ordering options for pinned environments.

输入 `PinnedEnvironmentOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order pinned environments by the specified field.
`field` (`PinnedEnvironmentOrderField!`)	The field to order pinned environments by.

ProjectCardImport

An issue or PR and its owning repository to be used in a project card.

输入 `ProjectCardImport` 字段

名称	说明
`number` (`Int!`)	The issue or pull request number.
`repository` (`String!`)	Repository name with owner (owner/repository).

ProjectColumnImport

A project column and a list of its issues and PRs.

输入 `ProjectColumnImport` 字段

名称	说明
`columnName` (`String!`)	The name of the column.
`issues` (`[ProjectCardImport!]`)	A list of issues and pull requests in the column.
`position` (`Int!`)	The position of the column, starting from 0.

ProjectOrder

Ways in which lists of projects can be ordered upon return.

输入 `ProjectOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order projects by the specified field.
`field` (`ProjectOrderField!`)	The field in which to order projects by.

ProjectV2Collaborator

A collaborator to update on a project. Only one of the userId or teamId should be provided.

输入 `ProjectV2Collaborator` 字段

名称	说明
`role` (`ProjectV2Roles!`)	The role to grant the collaborator.
`teamId` (`ID`)	The ID of the team as a collaborator.
`userId` (`ID`)	The ID of the user as a collaborator.

ProjectV2FieldOrder

Ordering options for project v2 field connections.

输入 `ProjectV2FieldOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`ProjectV2FieldOrderField!`)	The field to order the project v2 fields by.

ProjectV2FieldValue

The values that can be used to update a field of an item inside a Project. Only 1 value can be updated at a time.

输入 `ProjectV2FieldValue` 字段

名称	说明
`date` (`Date`)	The ISO 8601 date to set on the field.
`iterationId` (`String`)	The id of the iteration to set on the field.
`number` (`Float`)	The number to set on the field.
`singleSelectOptionId` (`String`)	The id of the single select option to set on the field.
`text` (`String`)	The text to set on the field.

ProjectV2Filters

Ways in which to filter lists of projects.

输入 `ProjectV2Filters` 字段

名称	说明
`state` (`ProjectV2State`)	List project v2 filtered by the state given.

ProjectV2ItemFieldValueOrder

Ordering options for project v2 item field value connections.

输入 `ProjectV2ItemFieldValueOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`ProjectV2ItemFieldValueOrderField!`)	The field to order the project v2 item field values by.

ProjectV2ItemOrder

Ordering options for project v2 item connections.

输入 `ProjectV2ItemOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`ProjectV2ItemOrderField!`)	The field to order the project v2 items by.

ProjectV2Order

Ways in which lists of projects can be ordered upon return.

输入 `ProjectV2Order` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order projects by the specified field.
`field` (`ProjectV2OrderField!`)	The field in which to order projects by.

ProjectV2SingleSelectFieldOptionInput

Represents a single select field option.

输入 `ProjectV2SingleSelectFieldOptionInput` 字段

名称	说明
`color` (`ProjectV2SingleSelectFieldOptionColor!`)	The display color of the option.
`description` (`String!`)	The description text of the option.
`name` (`String!`)	The name of the option.

ProjectV2StatusOrder

Ways in which project v2 status updates can be ordered.

输入 `ProjectV2StatusOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order nodes.
`field` (`ProjectV2StatusUpdateOrderField!`)	The field by which to order nodes.

ProjectV2ViewOrder

Ordering options for project v2 view connections.

输入 `ProjectV2ViewOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`ProjectV2ViewOrderField!`)	The field to order the project v2 views by.

ProjectV2WorkflowOrder

Ordering options for project v2 workflows connections.

输入 `ProjectV2WorkflowOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`ProjectV2WorkflowsOrderField!`)	The field to order the project v2 workflows by.

PropertyTargetDefinitionInput

A property that must match.

输入 `PropertyTargetDefinitionInput` 字段

名称	说明
`name` (`String!`)	The name of the property.
`propertyValues` (`[String!]!`)	The values to match for.
`source` (`String`)	The source of the property. Choose`custom`or 'system'. Defaults to 'custom' if not specified.

PullRequestOrder

Ways in which lists of issues can be ordered upon return.

输入 `PullRequestOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order pull requests by the specified field.
`field` (`PullRequestOrderField!`)	The field in which to order pull requests by.

PullRequestParametersInput

Require all commits be made to a non-target branch and submitted via a pull request before they can be merged.

输入 `PullRequestParametersInput` 字段

名称	说明
`dismissStaleReviewsOnPush` (`Boolean!`)	New, reviewable commits pushed will dismiss previous pull request review approvals.
`requireCodeOwnerReview` (`Boolean!`)	Require an approving review in pull requests that modify files that have a designated code owner.
`requireLastPushApproval` (`Boolean!`)	Whether the most recent reviewable push must be approved by someone other than the person who pushed it.
`requiredApprovingReviewCount` (`Int!`)	The number of approving reviews that are required before a pull request can be merged.
`requiredReviewThreadResolution` (`Boolean!`)	All conversations on code must be resolved before a pull request can be merged.

ReactionOrder

Ways in which lists of reactions can be ordered upon return.

输入 `ReactionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order reactions by the specified field.
`field` (`ReactionOrderField!`)	The field in which to order reactions by.

RefNameConditionTargetInput

Parameters to be used for the ref_name condition.

输入 `RefNameConditionTargetInput` 字段

名称	说明
`exclude` (`[String!]!`)	Array of ref names or patterns to exclude. The condition will not pass if any of these patterns match.
`include` (`[String!]!`)	Array of ref names or patterns to include. One of these patterns must match for the condition to pass. Also accepts `~DEFAULT_BRANCH` to include the default branch or `~ALL` to include all branches.

RefOrder

Ways in which lists of git refs can be ordered upon return.

输入 `RefOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order refs by the specified field.
`field` (`RefOrderField!`)	The field in which to order refs by.

RefUpdate

A ref update.

输入 `RefUpdate` 字段

名称	说明
`afterOid` (`GitObjectID!`)	The value this ref should be updated to.
`beforeOid` (`GitObjectID`)	The value this ref needs to point to before the update.
`force` (`Boolean`)	Force a non fast-forward update.
`name` (`GitRefname!`)	The fully qualified name of the ref to be update. For example `refs/heads/branch-name`.

RegenerateVerifiableDomainTokenInput

Autogenerated input type of RegenerateVerifiableDomainToken.

输入 `RegenerateVerifiableDomainTokenInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the verifiable domain to regenerate the verification token of.

RejectDeploymentsInput

Autogenerated input type of RejectDeployments.

输入 `RejectDeploymentsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`comment` (`String`)	Optional comment for rejecting deployments.
`environmentIds` (`[ID!]!`)	The ids of environments to reject deployments.
`workflowRunId` (`ID!`)	The node ID of the workflow run containing the pending deployments.

ReleaseOrder

Ways in which lists of releases can be ordered upon return.

输入 `ReleaseOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order releases by the specified field.
`field` (`ReleaseOrderField!`)	The field in which to order releases by.

RemoveAssigneesFromAssignableInput

Autogenerated input type of RemoveAssigneesFromAssignable.

输入 `RemoveAssigneesFromAssignableInput` 字段

名称	说明
`assignableId` (`ID!`)	The id of the assignable object to remove assignees from.
`assigneeIds` (`[ID!]!`)	The id of users to remove as assignees.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.

RemoveEnterpriseAdminInput

Autogenerated input type of RemoveEnterpriseAdmin.

输入 `RemoveEnterpriseAdminInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The Enterprise ID from which to remove the administrator.
`login` (`String!`)	The login of the user to remove as an administrator.

RemoveLabelsFromLabelableInput

Autogenerated input type of RemoveLabelsFromLabelable.

输入 `RemoveLabelsFromLabelableInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`labelIds` (`[ID!]!`)	The ids of labels to remove.
`labelableId` (`ID!`)	The id of the Labelable to remove labels from.

RemoveOutsideCollaboratorInput

Autogenerated input type of RemoveOutsideCollaborator.

输入 `RemoveOutsideCollaboratorInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	The ID of the organization to remove the outside collaborator from.
`userId` (`ID!`)	The ID of the outside collaborator to remove.

RemoveReactionInput

Autogenerated input type of RemoveReaction.

输入 `RemoveReactionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`content` (`ReactionContent!`)	The name of the emoji reaction to remove.
`subjectId` (`ID!`)	The Node ID of the subject to modify.

RemoveStarInput

Autogenerated input type of RemoveStar.

输入 `RemoveStarInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`starrableId` (`ID!`)	The Starrable ID to unstar.

RemoveUpvoteInput

Autogenerated input type of RemoveUpvote.

输入 `RemoveUpvoteInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`subjectId` (`ID!`)	The Node ID of the discussion or comment to remove upvote.

ReopenDiscussionInput

Autogenerated input type of ReopenDiscussion.

输入 `ReopenDiscussionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`discussionId` (`ID!`)	ID of the discussion to be reopened.

ReopenIssueInput

Autogenerated input type of ReopenIssue.

输入 `ReopenIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	ID of the issue to be opened.

ReopenPullRequestInput

Autogenerated input type of ReopenPullRequest.

输入 `ReopenPullRequestInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	ID of the pull request to be reopened.

ReorderEnvironmentInput

Autogenerated input type of ReorderEnvironment.

输入 `ReorderEnvironmentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`environmentId` (`ID!`)	The ID of the environment to modify.
`position` (`Int!`)	The desired position of the environment.

RepositoryIdConditionTargetInput

Parameters to be used for the repository_id condition.

输入 `RepositoryIdConditionTargetInput` 字段

名称	说明
`repositoryIds` (`[ID!]!`)	One of these repo IDs must match the repo.

RepositoryInvitationOrder

Ordering options for repository invitation connections.

输入 `RepositoryInvitationOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`RepositoryInvitationOrderField!`)	The field to order repository invitations by.

RepositoryMigrationOrder

Ordering options for repository migrations.

输入 `RepositoryMigrationOrder` 字段

名称	说明
`direction` (`RepositoryMigrationOrderDirection!`)	The ordering direction.
`field` (`RepositoryMigrationOrderField!`)	The field to order repository migrations by.

RepositoryNameConditionTargetInput

Parameters to be used for the repository_name condition.

输入 `RepositoryNameConditionTargetInput` 字段

名称	说明
`exclude` (`[String!]!`)	Array of repository names or patterns to exclude. The condition will not pass if any of these patterns match.
`include` (`[String!]!`)	Array of repository names or patterns to include. One of these patterns must match for the condition to pass. Also accepts `~ALL` to include all repositories.
`protected` (`Boolean`)	Target changes that match these patterns will be prevented except by those with bypass permissions.

RepositoryOrder

Ordering options for repository connections.

输入 `RepositoryOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`RepositoryOrderField!`)	The field to order repositories by.

RepositoryPropertyConditionTargetInput

Parameters to be used for the repository_property condition.

输入 `RepositoryPropertyConditionTargetInput` 字段

名称	说明
`exclude` (`[PropertyTargetDefinitionInput!]!`)	Array of repository properties that must not match.
`include` (`[PropertyTargetDefinitionInput!]!`)	Array of repository properties that must match.

RepositoryRuleConditionsInput

Specifies the conditions required for a ruleset to evaluate.

输入 `RepositoryRuleConditionsInput` 字段

名称	说明
`refName` (`RefNameConditionTargetInput`)	Configuration for the ref_name condition.
`repositoryId` (`RepositoryIdConditionTargetInput`)	Configuration for the repository_id condition.
`repositoryName` (`RepositoryNameConditionTargetInput`)	Configuration for the repository_name condition.
`repositoryProperty` (`RepositoryPropertyConditionTargetInput`)	Configuration for the repository_property condition.

RepositoryRuleInput

Specifies the attributes for a new or updated rule.

输入 `RepositoryRuleInput` 字段

名称	说明
`id` (`ID`)	Optional ID of this rule when updating.
`parameters` (`RuleParametersInput`)	The parameters for the rule.
`type` (`RepositoryRuleType!`)	The type of rule to create.

RepositoryRuleOrder

Ordering options for repository rules.

输入 `RepositoryRuleOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`RepositoryRuleOrderField!`)	The field to order repository rules by.

RepositoryRulesetBypassActorInput

Specifies the attributes for a new or updated ruleset bypass actor. Only one of actor_id, repository_role_database_id, organization_admin, or deploy_key should be specified.

输入 `RepositoryRulesetBypassActorInput` 字段

名称	说明
`actorId` (`ID`)	For Team and Integration bypasses, the Team or Integration ID.
`bypassMode` (`RepositoryRulesetBypassActorBypassMode!`)	The bypass mode for this actor.
`deployKey` (`Boolean`)	For deploy key bypasses, true. Can only use ALWAYS as the bypass mode.
`organizationAdmin` (`Boolean`)	For organization owner bypasses, true.
`repositoryRoleDatabaseId` (`Int`)	For role bypasses, the role database ID.

RequestReviewsInput

Autogenerated input type of RequestReviews.

输入 `RequestReviewsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestId` (`ID!`)	The Node ID of the pull request to modify.
`teamIds` (`[ID!]`)	The Node IDs of the team to request.
`union` (`Boolean`)	Add users to the set rather than replace.
`userIds` (`[ID!]`)	The Node IDs of the user to request.

RequiredDeploymentsParametersInput

Choose which environments must be successfully deployed to before refs can be pushed into a ref that matches this rule.

输入 `RequiredDeploymentsParametersInput` 字段

名称	说明
`requiredDeploymentEnvironments` (`[String!]!`)	The environments that must be successfully deployed to before branches can be merged.

RequiredStatusCheckInput

Specifies the attributes for a new or updated required status check.

输入 `RequiredStatusCheckInput` 字段

名称	说明
`appId` (`ID`)	The ID of the App that must set the status in order for it to be accepted. Omit this value to use whichever app has recently been setting this status, or use "any" to allow any app to set the status.
`context` (`String!`)	Status check context that must pass for commits to be accepted to the matching branch.

RequiredStatusChecksParametersInput

Choose which status checks must pass before the ref is updated. When enabled, commits must first be pushed to another ref where the checks pass.

输入 `RequiredStatusChecksParametersInput` 字段

名称	说明
`doNotEnforceOnCreate` (`Boolean`)	Allow repositories and branches to be created if a check would otherwise prohibit it.
`requiredStatusChecks` (`[StatusCheckConfigurationInput!]!`)	Status checks that are required.
`strictRequiredStatusChecksPolicy` (`Boolean!`)	Whether pull requests targeting a matching branch must be tested with the latest code. This setting will not take effect unless at least one status check is enabled.

RerequestCheckSuiteInput

Autogenerated input type of RerequestCheckSuite.

输入 `RerequestCheckSuiteInput` 字段

名称	说明
`checkSuiteId` (`ID!`)	The Node ID of the check suite.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The Node ID of the repository.

ResolveReviewThreadInput

Autogenerated input type of ResolveReviewThread.

输入 `ResolveReviewThreadInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`threadId` (`ID!`)	The ID of the thread to resolve.

RevertPullRequestInput

Autogenerated input type of RevertPullRequest.

输入 `RevertPullRequestInput` 字段

名称	说明
`body` (`String`)	The description of the revert pull request.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`draft` (`Boolean`)	Indicates whether the revert pull request should be a draft.
`pullRequestId` (`ID!`)	The ID of the pull request to revert.
`title` (`String`)	The title of the revert pull request.

RevokeEnterpriseOrganizationsMigratorRoleInput

Autogenerated input type of RevokeEnterpriseOrganizationsMigratorRole.

输入 `RevokeEnterpriseOrganizationsMigratorRoleInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise to which all organizations managed by it will be granted the migrator role.
`login` (`String!`)	The login of the user to revoke the migrator role.

RevokeMigratorRoleInput

Autogenerated input type of RevokeMigratorRole.

输入 `RevokeMigratorRoleInput` 字段

名称	说明
`actor` (`String!`)	The user login or Team slug to revoke the migrator role from.
`actorType` (`ActorType!`)	Specifies the type of the actor, can be either USER or TEAM.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	The ID of the organization that the user/team belongs to.

RuleParametersInput

Specifies the parameters for a RepositoryRule object. Only one of the fields should be specified.

输入 `RuleParametersInput` 字段

名称	说明
`branchNamePattern` (`BranchNamePatternParametersInput`)	Parameters used for the `branch_name_pattern` rule type.
`codeScanning` (`CodeScanningParametersInput`)	Parameters used for the `code_scanning` rule type.
`commitAuthorEmailPattern` (`CommitAuthorEmailPatternParametersInput`)	Parameters used for the `commit_author_email_pattern` rule type.
`commitMessagePattern` (`CommitMessagePatternParametersInput`)	Parameters used for the `commit_message_pattern` rule type.
`committerEmailPattern` (`CommitterEmailPatternParametersInput`)	Parameters used for the `committer_email_pattern` rule type.
`fileExtensionRestriction` (`FileExtensionRestrictionParametersInput`)	Parameters used for the `file_extension_restriction` rule type.
`filePathRestriction` (`FilePathRestrictionParametersInput`)	Parameters used for the `file_path_restriction` rule type.
`maxFilePathLength` (`MaxFilePathLengthParametersInput`)	Parameters used for the `max_file_path_length` rule type.
`maxFileSize` (`MaxFileSizeParametersInput`)	Parameters used for the `max_file_size` rule type.
`mergeQueue` (`MergeQueueParametersInput`)	Parameters used for the `merge_queue` rule type.
`pullRequest` (`PullRequestParametersInput`)	Parameters used for the `pull_request` rule type.
`requiredDeployments` (`RequiredDeploymentsParametersInput`)	Parameters used for the `required_deployments` rule type.
`requiredStatusChecks` (`RequiredStatusChecksParametersInput`)	Parameters used for the `required_status_checks` rule type.
`tagNamePattern` (`TagNamePatternParametersInput`)	Parameters used for the `tag_name_pattern` rule type.
`update` (`UpdateParametersInput`)	Parameters used for the `update` rule type.
`workflows` (`WorkflowsParametersInput`)	Parameters used for the `workflows` rule type.

SavedReplyOrder

Ordering options for saved reply connections.

输入 `SavedReplyOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`SavedReplyOrderField!`)	The field to order saved replies by.

StarOrder

Ways in which star connections can be ordered.

输入 `StarOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order nodes.
`field` (`StarOrderField!`)	The field in which to order nodes by.

StartOrganizationMigrationInput

Autogenerated input type of StartOrganizationMigration.

输入 `StartOrganizationMigrationInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`sourceAccessToken` (`String!`)	The migration source access token.
`sourceOrgUrl` (`URI!`)	The URL of the organization to migrate.
`targetEnterpriseId` (`ID!`)	The ID of the enterprise the target organization belongs to.
`targetOrgName` (`String!`)	The name of the target organization.

StartRepositoryMigrationInput

Autogenerated input type of StartRepositoryMigration.

输入 `StartRepositoryMigrationInput` 字段

名称	说明
`accessToken` (`String`)	The migration source access token.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`continueOnError` (`Boolean`)	Whether to continue the migration on error. Defaults to `true`.
`gitArchiveUrl` (`String`)	The signed URL to access the user-uploaded git archive.
`githubPat` (`String`)	The GitHub personal access token of the user importing to the target repository.
`lockSource` (`Boolean`)	Whether to lock the source repository.
`metadataArchiveUrl` (`String`)	The signed URL to access the user-uploaded metadata archive.
`ownerId` (`ID!`)	The ID of the organization that will own the imported repository.
`repositoryName` (`String!`)	The name of the imported repository.
`skipReleases` (`Boolean`)	Whether to skip migrating releases for the repository.
`sourceId` (`ID!`)	The ID of the migration source.
`sourceRepositoryUrl` (`URI!`)	The URL of the source repository.
`targetRepoVisibility` (`String`)	The visibility of the imported repository.

StatusCheckConfigurationInput

Required status check.

输入 `StatusCheckConfigurationInput` 字段

名称	说明
`context` (`String!`)	The status check context name that must be present on the commit.
`integrationId` (`Int`)	The optional integration ID that this status check must originate from.

SubmitPullRequestReviewInput

Autogenerated input type of SubmitPullRequestReview.

输入 `SubmitPullRequestReviewInput` 字段

名称	说明
`body` (`String`)	The text field to set on the Pull Request Review.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`event` (`PullRequestReviewEvent!`)	The event to send to the Pull Request Review.
`pullRequestId` (`ID`)	The Pull Request ID to submit any pending reviews.
`pullRequestReviewId` (`ID`)	The Pull Request Review ID to submit.

TagNamePatternParametersInput

Parameters to be used for the tag_name_pattern rule.

输入 `TagNamePatternParametersInput` 字段

名称	说明
`name` (`String`)	How this rule will appear to users.
`negate` (`Boolean`)	If true, the rule will fail if the pattern matches.
`operator` (`String!`)	The operator to use for matching.
`pattern` (`String!`)	The pattern to match with.

TeamDiscussionCommentOrder

Ways in which team discussion comment connections can be ordered.

输入 `TeamDiscussionCommentOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order nodes.
`field` (`TeamDiscussionCommentOrderField!`)	The field by which to order nodes.

TeamDiscussionOrder

Ways in which team discussion connections can be ordered.

输入 `TeamDiscussionOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order nodes.
`field` (`TeamDiscussionOrderField!`)	The field by which to order nodes.

TeamMemberOrder

Ordering options for team member connections.

输入 `TeamMemberOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`TeamMemberOrderField!`)	The field to order team members by.

TeamOrder

Ways in which team connections can be ordered.

输入 `TeamOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order nodes.
`field` (`TeamOrderField!`)	The field in which to order nodes by.

TeamRepositoryOrder

Ordering options for team repository connections.

输入 `TeamRepositoryOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`TeamRepositoryOrderField!`)	The field to order repositories by.

TransferIssueInput

Autogenerated input type of TransferIssue.

输入 `TransferIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`createLabelsIfMissing` (`Boolean`)	Whether to create labels if they don't exist in the target repository (matched by name).
`issueId` (`ID!`)	The Node ID of the issue to be transferred.
`repositoryId` (`ID!`)	The Node ID of the repository the issue should be transferred to.

UnarchiveProjectV2ItemInput

Autogenerated input type of UnarchiveProjectV2Item.

输入 `UnarchiveProjectV2ItemInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The ID of the ProjectV2Item to unarchive.
`projectId` (`ID!`)	The ID of the Project to archive the item from.

UnarchiveRepositoryInput

Autogenerated input type of UnarchiveRepository.

输入 `UnarchiveRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The ID of the repository to unarchive.

UnfollowOrganizationInput

Autogenerated input type of UnfollowOrganization.

输入 `UnfollowOrganizationInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	ID of the organization to unfollow.

UnfollowUserInput

Autogenerated input type of UnfollowUser.

输入 `UnfollowUserInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`userId` (`ID!`)	ID of the user to unfollow.

UnlinkProjectV2FromRepositoryInput

Autogenerated input type of UnlinkProjectV2FromRepository.

输入 `UnlinkProjectV2FromRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the project to unlink from the repository.
`repositoryId` (`ID!`)	The ID of the repository to unlink from the project.

UnlinkProjectV2FromTeamInput

Autogenerated input type of UnlinkProjectV2FromTeam.

输入 `UnlinkProjectV2FromTeamInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the project to unlink from the team.
`teamId` (`ID!`)	The ID of the team to unlink from the project.

UnlinkRepositoryFromProjectInput

Autogenerated input type of UnlinkRepositoryFromProject.

输入 `UnlinkRepositoryFromProjectInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project linked to the Repository.
`repositoryId` (`ID!`)	The ID of the Repository linked to the Project.

UnlockLockableInput

Autogenerated input type of UnlockLockable.

输入 `UnlockLockableInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`lockableId` (`ID!`)	ID of the item to be unlocked.

UnmarkDiscussionCommentAsAnswerInput

Autogenerated input type of UnmarkDiscussionCommentAsAnswer.

输入 `UnmarkDiscussionCommentAsAnswerInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the discussion comment to unmark as an answer.

UnmarkFileAsViewedInput

Autogenerated input type of UnmarkFileAsViewed.

输入 `UnmarkFileAsViewedInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`path` (`String!`)	The path of the file to mark as unviewed.
`pullRequestId` (`ID!`)	The Node ID of the pull request.

UnmarkIssueAsDuplicateInput

Autogenerated input type of UnmarkIssueAsDuplicate.

输入 `UnmarkIssueAsDuplicateInput` 字段

名称	说明
`canonicalId` (`ID!`)	ID of the issue or pull request currently considered canonical/authoritative/original.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`duplicateId` (`ID!`)	ID of the issue or pull request currently marked as a duplicate.

UnmarkProjectV2AsTemplateInput

Autogenerated input type of UnmarkProjectV2AsTemplate.

输入 `UnmarkProjectV2AsTemplateInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`projectId` (`ID!`)	The ID of the Project to unmark as a template.

UnminimizeCommentInput

Autogenerated input type of UnminimizeComment.

输入 `UnminimizeCommentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`subjectId` (`ID!`)	The Node ID of the subject to modify.

UnpinIssueInput

Autogenerated input type of UnpinIssue.

输入 `UnpinIssueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`issueId` (`ID!`)	The ID of the issue to be unpinned.

UnresolveReviewThreadInput

Autogenerated input type of UnresolveReviewThread.

输入 `UnresolveReviewThreadInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`threadId` (`ID!`)	The ID of the thread to unresolve.

UnsubscribeFromNotificationsInput

Autogenerated input type of UnsubscribeFromNotifications.

输入 `UnsubscribeFromNotificationsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ids` (`[ID!]!`)	The NotificationThread IDs of the objects to unsubscribe from.

UpdateBranchProtectionRuleInput

Autogenerated input type of UpdateBranchProtectionRule.

输入 `UpdateBranchProtectionRuleInput` 字段

名称	说明
`allowsDeletions` (`Boolean`)	Can this branch be deleted.
`allowsForcePushes` (`Boolean`)	Are force pushes allowed on this branch.
`blocksCreations` (`Boolean`)	Is branch creation a protected operation.
`branchProtectionRuleId` (`ID!`)	The global relay id of the branch protection rule to be updated.
`bypassForcePushActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to bypass force push targeting matching branches.
`bypassPullRequestActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to bypass pull requests targeting matching branches.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`dismissesStaleReviews` (`Boolean`)	Will new commits pushed to matching branches dismiss pull request review approvals.
`isAdminEnforced` (`Boolean`)	Can admins override branch protection.
`lockAllowsFetchAndMerge` (`Boolean`)	Whether users can pull changes from upstream when the branch is locked. Set to `true` to allow fork syncing. Set to `false` to prevent fork syncing.
`lockBranch` (`Boolean`)	Whether to set the branch as read-only. If this is true, users will not be able to push to the branch.
`pattern` (`String`)	The glob-like pattern used to determine matching branches.
`pushActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to push to matching branches.
`requireLastPushApproval` (`Boolean`)	Whether the most recent push must be approved by someone other than the person who pushed it.
`requiredApprovingReviewCount` (`Int`)	Number of approving reviews required to update matching branches.
`requiredDeploymentEnvironments` (`[String!]`)	The list of required deployment environments.
`requiredStatusCheckContexts` (`[String!]`)	List of required status check contexts that must pass for commits to be accepted to matching branches.
`requiredStatusChecks` (`[RequiredStatusCheckInput!]`)	The list of required status checks.
`requiresApprovingReviews` (`Boolean`)	Are approving reviews required to update matching branches.
`requiresCodeOwnerReviews` (`Boolean`)	Are reviews from code owners required to update matching branches.
`requiresCommitSignatures` (`Boolean`)	Are commits required to be signed.
`requiresConversationResolution` (`Boolean`)	Are conversations required to be resolved before merging.
`requiresDeployments` (`Boolean`)	Are successful deployments required before merging.
`requiresLinearHistory` (`Boolean`)	Are merge commits prohibited from being pushed to this branch.
`requiresStatusChecks` (`Boolean`)	Are status checks required to update matching branches.
`requiresStrictStatusChecks` (`Boolean`)	Are branches required to be up to date before merging.
`restrictsPushes` (`Boolean`)	Is pushing to matching branches restricted.
`restrictsReviewDismissals` (`Boolean`)	Is dismissal of pull request reviews restricted.
`reviewDismissalActorIds` (`[ID!]`)	A list of User, Team, or App IDs allowed to dismiss reviews on pull requests targeting matching branches.

UpdateCheckRunInput

Autogenerated input type of UpdateCheckRun.

输入 `UpdateCheckRunInput` 字段

名称	说明
`actions` (`[CheckRunAction!]`)	Possible further actions the integrator can perform, which a user may trigger.
`checkRunId` (`ID!`)	The node of the check.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`completedAt` (`DateTime`)	The time that the check run finished.
`conclusion` (`CheckConclusionState`)	The final conclusion of the check.
`detailsUrl` (`URI`)	The URL of the integrator's site that has the full details of the check.
`externalId` (`String`)	A reference for the run on the integrator's system.
`name` (`String`)	The name of the check.
`output` (`CheckRunOutput`)	Descriptive details about the run.
`repositoryId` (`ID!`)	The node ID of the repository.
`startedAt` (`DateTime`)	The time that the check run began.
`status` (`RequestableCheckStatusState`)	The current status.

UpdateCheckSuitePreferencesInput

Autogenerated input type of UpdateCheckSuitePreferences.

输入 `UpdateCheckSuitePreferencesInput` 字段

名称	说明
`autoTriggerPreferences` (`[CheckSuiteAutoTriggerPreference!]!`)	The check suite preferences to modify.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The Node ID of the repository.

UpdateDiscussionCommentInput

Autogenerated input type of UpdateDiscussionComment.

输入 `UpdateDiscussionCommentInput` 字段

名称	说明
`body` (`String!`)	The new contents of the comment body.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`commentId` (`ID!`)	The Node ID of the discussion comment to update.

UpdateDiscussionInput

Autogenerated input type of UpdateDiscussion.

输入 `UpdateDiscussionInput` 字段

名称	说明
`body` (`String`)	The new contents of the discussion body.
`categoryId` (`ID`)	The Node ID of a discussion category within the same repository to change this discussion to.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`discussionId` (`ID!`)	The Node ID of the discussion to update.
`title` (`String`)	The new discussion title.

UpdateEnterpriseAllowPrivateRepositoryForkingSettingInput

Autogenerated input type of UpdateEnterpriseAllowPrivateRepositoryForkingSetting.

输入 `UpdateEnterpriseAllowPrivateRepositoryForkingSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the allow private repository forking setting.
`policyValue` (`EnterpriseAllowPrivateRepositoryForkingPolicyValue`)	The value for the allow private repository forking policy on the enterprise.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the allow private repository forking setting on the enterprise.

UpdateEnterpriseDefaultRepositoryPermissionSettingInput

Autogenerated input type of UpdateEnterpriseDefaultRepositoryPermissionSetting.

输入 `UpdateEnterpriseDefaultRepositoryPermissionSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the base repository permission setting.
`settingValue` (`EnterpriseDefaultRepositoryPermissionSettingValue!`)	The value for the base repository permission setting on the enterprise.

UpdateEnterpriseMembersCanChangeRepositoryVisibilitySettingInput

Autogenerated input type of UpdateEnterpriseMembersCanChangeRepositoryVisibilitySetting.

输入 `UpdateEnterpriseMembersCanChangeRepositoryVisibilitySettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can change repository visibility setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can change repository visibility setting on the enterprise.

UpdateEnterpriseMembersCanCreateRepositoriesSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanCreateRepositoriesSetting.

输入 `UpdateEnterpriseMembersCanCreateRepositoriesSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can create repositories setting.
`membersCanCreateInternalRepositories` (`Boolean`)	Allow members to create internal repositories. Defaults to current value.
`membersCanCreatePrivateRepositories` (`Boolean`)	Allow members to create private repositories. Defaults to current value.
`membersCanCreatePublicRepositories` (`Boolean`)	Allow members to create public repositories. Defaults to current value.
`membersCanCreateRepositoriesPolicyEnabled` (`Boolean`)	When false, allow member organizations to set their own repository creation member privileges.
`settingValue` (`EnterpriseMembersCanCreateRepositoriesSettingValue`)	Value for the members can create repositories setting on the enterprise. This or the granular public/private/internal allowed fields (but not both) must be provided.

UpdateEnterpriseMembersCanDeleteIssuesSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanDeleteIssuesSetting.

输入 `UpdateEnterpriseMembersCanDeleteIssuesSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can delete issues setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can delete issues setting on the enterprise.

UpdateEnterpriseMembersCanDeleteRepositoriesSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanDeleteRepositoriesSetting.

输入 `UpdateEnterpriseMembersCanDeleteRepositoriesSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can delete repositories setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can delete repositories setting on the enterprise.

UpdateEnterpriseMembersCanInviteCollaboratorsSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanInviteCollaboratorsSetting.

输入 `UpdateEnterpriseMembersCanInviteCollaboratorsSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can invite collaborators setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can invite collaborators setting on the enterprise.

UpdateEnterpriseMembersCanMakePurchasesSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanMakePurchasesSetting.

输入 `UpdateEnterpriseMembersCanMakePurchasesSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can make purchases setting.
`settingValue` (`EnterpriseMembersCanMakePurchasesSettingValue!`)	The value for the members can make purchases setting on the enterprise.

UpdateEnterpriseMembersCanUpdateProtectedBranchesSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanUpdateProtectedBranchesSetting.

输入 `UpdateEnterpriseMembersCanUpdateProtectedBranchesSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can update protected branches setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can update protected branches setting on the enterprise.

UpdateEnterpriseMembersCanViewDependencyInsightsSettingInput

Autogenerated input type of UpdateEnterpriseMembersCanViewDependencyInsightsSetting.

输入 `UpdateEnterpriseMembersCanViewDependencyInsightsSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the members can view dependency insights setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the members can view dependency insights setting on the enterprise.

UpdateEnterpriseOrganizationProjectsSettingInput

Autogenerated input type of UpdateEnterpriseOrganizationProjectsSetting.

输入 `UpdateEnterpriseOrganizationProjectsSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the organization projects setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the organization projects setting on the enterprise.

UpdateEnterpriseOwnerOrganizationRoleInput

Autogenerated input type of UpdateEnterpriseOwnerOrganizationRole.

输入 `UpdateEnterpriseOwnerOrganizationRoleInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the Enterprise which the owner belongs to.
`organizationId` (`ID!`)	The ID of the organization for membership change.
`organizationRole` (`RoleInOrganization!`)	The role to assume in the organization.

UpdateEnterpriseProfileInput

Autogenerated input type of UpdateEnterpriseProfile.

输入 `UpdateEnterpriseProfileInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	The description of the enterprise.
`enterpriseId` (`ID!`)	The Enterprise ID to update.
`location` (`String`)	The location of the enterprise.
`name` (`String`)	The name of the enterprise.
`websiteUrl` (`String`)	The URL of the enterprise's website.

UpdateEnterpriseRepositoryProjectsSettingInput

Autogenerated input type of UpdateEnterpriseRepositoryProjectsSetting.

输入 `UpdateEnterpriseRepositoryProjectsSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the repository projects setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the repository projects setting on the enterprise.

UpdateEnterpriseTeamDiscussionsSettingInput

Autogenerated input type of UpdateEnterpriseTeamDiscussionsSetting.

输入 `UpdateEnterpriseTeamDiscussionsSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the team discussions setting.
`settingValue` (`EnterpriseEnabledDisabledSettingValue!`)	The value for the team discussions setting on the enterprise.

UpdateEnterpriseTwoFactorAuthenticationRequiredSettingInput

Autogenerated input type of UpdateEnterpriseTwoFactorAuthenticationRequiredSetting.

输入 `UpdateEnterpriseTwoFactorAuthenticationRequiredSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`enterpriseId` (`ID!`)	The ID of the enterprise on which to set the two factor authentication required setting.
`settingValue` (`EnterpriseEnabledSettingValue!`)	The value for the two factor authentication required setting on the enterprise.

UpdateEnvironmentInput

Autogenerated input type of UpdateEnvironment.

输入 `UpdateEnvironmentInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`environmentId` (`ID!`)	The node ID of the environment.
`preventSelfReview` (`Boolean`)	Whether deployments to this environment can be approved by the user who created the deployment.
`reviewers` (`[ID!]`)	The ids of users or teams that can approve deployments to this environment.
`waitTimer` (`Int`)	The wait timer in minutes.

UpdateIpAllowListEnabledSettingInput

Autogenerated input type of UpdateIpAllowListEnabledSetting.

输入 `UpdateIpAllowListEnabledSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The ID of the owner on which to set the IP allow list enabled setting.
`settingValue` (`IpAllowListEnabledSettingValue!`)	The value for the IP allow list enabled setting.

UpdateIpAllowListEntryInput

Autogenerated input type of UpdateIpAllowListEntry.

输入 `UpdateIpAllowListEntryInput` 字段

名称	说明
`allowListValue` (`String!`)	An IP address or range of addresses in CIDR notation.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ipAllowListEntryId` (`ID!`)	The ID of the IP allow list entry to update.
`isActive` (`Boolean!`)	Whether the IP allow list entry is active when an IP allow list is enabled.
`name` (`String`)	An optional name for the IP allow list entry.

UpdateIpAllowListForInstalledAppsEnabledSettingInput

Autogenerated input type of UpdateIpAllowListForInstalledAppsEnabledSetting.

输入 `UpdateIpAllowListForInstalledAppsEnabledSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The ID of the owner.
`settingValue` (`IpAllowListForInstalledAppsEnabledSettingValue!`)	The value for the IP allow list configuration for installed GitHub Apps setting.

UpdateIssueCommentInput

Autogenerated input type of UpdateIssueComment.

输入 `UpdateIssueCommentInput` 字段

名称	说明
`body` (`String!`)	The updated text of the comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the IssueComment to modify.

UpdateIssueInput

Autogenerated input type of UpdateIssue.

输入 `UpdateIssueInput` 字段

名称	说明
`assigneeIds` (`[ID!]`)	An array of Node IDs of users for this issue.
`body` (`String`)	The body for the issue description.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the Issue to modify.
`labelIds` (`[ID!]`)	An array of Node IDs of labels for this issue.
`milestoneId` (`ID`)	The Node ID of the milestone for this issue.
`projectIds` (`[ID!]`)	An array of Node IDs for projects associated with this issue.
`state` (`IssueState`)	The desired issue state.
`title` (`String`)	The title for the issue.

UpdateLabelInput

Autogenerated input type of UpdateLabel.

输入 `UpdateLabelInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`color` (`String`)	A 6 character hex code, without the leading #, identifying the updated color of the label.
`description` (`String`)	A brief description of the label, such as its purpose.
`id` (`ID!`)	The Node ID of the label to be updated.
`name` (`String`)	The updated name of the label.

UpdateNotificationRestrictionSettingInput

Autogenerated input type of UpdateNotificationRestrictionSetting.

输入 `UpdateNotificationRestrictionSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`ownerId` (`ID!`)	The ID of the owner on which to set the restrict notifications setting.
`settingValue` (`NotificationRestrictionSettingValue!`)	The value for the restrict notifications setting.

UpdateOrganizationAllowPrivateRepositoryForkingSettingInput

Autogenerated input type of UpdateOrganizationAllowPrivateRepositoryForkingSetting.

输入 `UpdateOrganizationAllowPrivateRepositoryForkingSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`forkingEnabled` (`Boolean!`)	Enable forking of private repositories in the organization?.
`organizationId` (`ID!`)	The ID of the organization on which to set the allow private repository forking setting.

UpdateOrganizationWebCommitSignoffSettingInput

Autogenerated input type of UpdateOrganizationWebCommitSignoffSetting.

输入 `UpdateOrganizationWebCommitSignoffSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`organizationId` (`ID!`)	The ID of the organization on which to set the web commit signoff setting.
`webCommitSignoffRequired` (`Boolean!`)	Enable signoff on web-based commits for repositories in the organization?.

UpdateParametersInput

Only allow users with bypass permission to update matching refs.

输入 `UpdateParametersInput` 字段

名称	说明
`updateAllowsFetchAndMerge` (`Boolean!`)	Branch can pull changes from its upstream repository.

UpdateProjectCardInput

Autogenerated input type of UpdateProjectCard.

输入 `UpdateProjectCardInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`isArchived` (`Boolean`)	Whether or not the ProjectCard should be archived.
`note` (`String`)	The note of ProjectCard.
`projectCardId` (`ID!`)	The ProjectCard ID to update.

UpdateProjectColumnInput

Autogenerated input type of UpdateProjectColumn.

输入 `UpdateProjectColumnInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String!`)	The name of project column.
`projectColumnId` (`ID!`)	The ProjectColumn ID to update.

UpdateProjectInput

Autogenerated input type of UpdateProject.

输入 `UpdateProjectInput` 字段

名称	说明
`body` (`String`)	The description of project.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`name` (`String`)	The name of project.
`projectId` (`ID!`)	The Project ID to update.
`public` (`Boolean`)	Whether the project is public or not.
`state` (`ProjectState`)	Whether the project is open or closed.

UpdateProjectV2CollaboratorsInput

Autogenerated input type of UpdateProjectV2Collaborators.

输入 `UpdateProjectV2CollaboratorsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`collaborators` (`[ProjectV2Collaborator!]!`)	The collaborators to update.
`projectId` (`ID!`)	The ID of the project to update the collaborators for.

UpdateProjectV2DraftIssueInput

Autogenerated input type of UpdateProjectV2DraftIssue.

输入 `UpdateProjectV2DraftIssueInput` 字段

名称	说明
`assigneeIds` (`[ID!]`)	The IDs of the assignees of the draft issue.
`body` (`String`)	The body of the draft issue.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`draftIssueId` (`ID!`)	The ID of the draft issue to update.
`title` (`String`)	The title of the draft issue.

UpdateProjectV2Input

Autogenerated input type of UpdateProjectV2.

输入 `UpdateProjectV2Input` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`closed` (`Boolean`)	Set the project to closed or open.
`projectId` (`ID!`)	The ID of the Project to update.
`public` (`Boolean`)	Set the project to public or private.
`readme` (`String`)	Set the readme description of the project.
`shortDescription` (`String`)	Set the short description of the project.
`title` (`String`)	Set the title of the project.

UpdateProjectV2ItemFieldValueInput

Autogenerated input type of UpdateProjectV2ItemFieldValue.

输入 `UpdateProjectV2ItemFieldValueInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`fieldId` (`ID!`)	The ID of the field to be updated.
`itemId` (`ID!`)	The ID of the item to be updated.
`projectId` (`ID!`)	The ID of the Project.
`value` (`ProjectV2FieldValue!`)	The value which will be set on the field.

UpdateProjectV2ItemPositionInput

Autogenerated input type of UpdateProjectV2ItemPosition.

输入 `UpdateProjectV2ItemPositionInput` 字段

名称	说明
`afterId` (`ID`)	The ID of the item to position this item after. If omitted or set to null the item will be moved to top.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The ID of the item to be moved.
`projectId` (`ID!`)	The ID of the Project.

UpdateProjectV2StatusUpdateInput

Autogenerated input type of UpdateProjectV2StatusUpdate.

输入 `UpdateProjectV2StatusUpdateInput` 字段

名称	说明
`body` (`String`)	The body of the status update.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`startDate` (`Date`)	The start date of the status update.
`status` (`ProjectV2StatusUpdateStatus`)	The status of the status update.
`statusUpdateId` (`ID!`)	The ID of the status update to be updated.
`targetDate` (`Date`)	The target date of the status update.

UpdatePullRequestBranchInput

Autogenerated input type of UpdatePullRequestBranch.

输入 `UpdatePullRequestBranchInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`expectedHeadOid` (`GitObjectID`)	The head ref oid for the upstream branch.
`pullRequestId` (`ID!`)	The Node ID of the pull request.
`updateMethod` (`PullRequestBranchUpdateMethod`)	The update branch method to use. If omitted, defaults to 'MERGE'.

UpdatePullRequestInput

Autogenerated input type of UpdatePullRequest.

输入 `UpdatePullRequestInput` 字段

名称	说明
`assigneeIds` (`[ID!]`)	An array of Node IDs of users for this pull request.
`baseRefName` (`String`)	The name of the branch you want your changes pulled into. This should be an existing branch on the current repository.
`body` (`String`)	The contents of the pull request.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`labelIds` (`[ID!]`)	An array of Node IDs of labels for this pull request.
`maintainerCanModify` (`Boolean`)	Indicates whether maintainers can modify the pull request.
`milestoneId` (`ID`)	The Node ID of the milestone for this pull request.
`projectIds` (`[ID!]`)	An array of Node IDs for projects associated with this pull request.
`pullRequestId` (`ID!`)	The Node ID of the pull request.
`state` (`PullRequestUpdateState`)	The target state of the pull request.
`title` (`String`)	The title of the pull request.

UpdatePullRequestReviewCommentInput

Autogenerated input type of UpdatePullRequestReviewComment.

输入 `UpdatePullRequestReviewCommentInput` 字段

名称	说明
`body` (`String!`)	The text of the comment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestReviewCommentId` (`ID!`)	The Node ID of the comment to modify.

UpdatePullRequestReviewInput

Autogenerated input type of UpdatePullRequestReview.

输入 `UpdatePullRequestReviewInput` 字段

名称	说明
`body` (`String!`)	The contents of the pull request review body.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`pullRequestReviewId` (`ID!`)	The Node ID of the pull request review to modify.

UpdateRefInput

Autogenerated input type of UpdateRef.

输入 `UpdateRefInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`force` (`Boolean`)	Permit updates of branch Refs that are not fast-forwards?.
`oid` (`GitObjectID!`)	The GitObjectID that the Ref shall be updated to target.
`refId` (`ID!`)	The Node ID of the Ref to be updated.

UpdateRefsInput

Autogenerated input type of UpdateRefs.

输入 `UpdateRefsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`refUpdates` (`[RefUpdate!]!`)	A list of ref updates.
`repositoryId` (`ID!`)	The Node ID of the repository.

UpdateRepositoryInput

Autogenerated input type of UpdateRepository.

输入 `UpdateRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	A new description for the repository. Pass an empty string to erase the existing description.
`hasDiscussionsEnabled` (`Boolean`)	Indicates if the repository should have the discussions feature enabled.
`hasIssuesEnabled` (`Boolean`)	Indicates if the repository should have the issues feature enabled.
`hasProjectsEnabled` (`Boolean`)	Indicates if the repository should have the project boards feature enabled.
`hasWikiEnabled` (`Boolean`)	Indicates if the repository should have the wiki feature enabled.
`homepageUrl` (`URI`)	The URL for a web page about this repository. Pass an empty string to erase the existing URL.
`name` (`String`)	The new name of the repository.
`repositoryId` (`ID!`)	The ID of the repository to update.
`template` (`Boolean`)	Whether this repository should be marked as a template such that anyone who can access it can create new repositories with the same files and directory structure.

UpdateRepositoryRulesetInput

Autogenerated input type of UpdateRepositoryRuleset.

输入 `UpdateRepositoryRulesetInput` 字段

名称	说明
`bypassActors` (`[RepositoryRulesetBypassActorInput!]`)	A list of actors that are allowed to bypass rules in this ruleset.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`conditions` (`RepositoryRuleConditionsInput`)	The list of conditions for this ruleset.
`enforcement` (`RuleEnforcement`)	The enforcement level for this ruleset.
`name` (`String`)	The name of the ruleset.
`repositoryRulesetId` (`ID!`)	The global relay id of the repository ruleset to be updated.
`rules` (`[RepositoryRuleInput!]`)	The list of rules for this ruleset.
`target` (`RepositoryRulesetTarget`)	The target of the ruleset.

UpdateRepositoryWebCommitSignoffSettingInput

Autogenerated input type of UpdateRepositoryWebCommitSignoffSetting.

输入 `UpdateRepositoryWebCommitSignoffSettingInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The ID of the repository to update.
`webCommitSignoffRequired` (`Boolean!`)	Indicates if the repository should require signoff on web-based commits.

UpdateSubscriptionInput

Autogenerated input type of UpdateSubscription.

输入 `UpdateSubscriptionInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`state` (`SubscriptionState!`)	The new state of the subscription.
`subscribableId` (`ID!`)	The Node ID of the subscribable object to modify.

UpdateTeamDiscussionCommentInput

Autogenerated input type of UpdateTeamDiscussionComment.

输入 `UpdateTeamDiscussionCommentInput` 字段

名称	说明
`body` (`String!`)	The updated text of the comment.
`bodyVersion` (`String`)	The current version of the body content.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the comment to modify.

UpdateTeamDiscussionInput

Autogenerated input type of UpdateTeamDiscussion.

输入 `UpdateTeamDiscussionInput` 字段

名称	说明
`body` (`String`)	The updated text of the discussion.
`bodyVersion` (`String`)	The current version of the body content. If provided, this update operation will be rejected if the given version does not match the latest version on the server.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The Node ID of the discussion to modify.
`pinned` (`Boolean`)	If provided, sets the pinned state of the updated discussion.
`title` (`String`)	The updated title of the discussion.

UpdateTeamReviewAssignmentInput

Autogenerated input type of UpdateTeamReviewAssignment.

输入 `UpdateTeamReviewAssignmentInput` 字段

名称	说明
`algorithm` (`TeamReviewAssignmentAlgorithm`)	The algorithm to use for review assignment.
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`countMembersAlreadyRequested` (`Boolean`)	Count any members whose review has already been requested against the required number of members assigned to review.
`enabled` (`Boolean!`)	Turn on or off review assignment.
`excludedTeamMemberIds` (`[ID!]`)	An array of team member IDs to exclude.
`id` (`ID!`)	The Node ID of the team to update review assignments of.
`includeChildTeamMembers` (`Boolean`)	Include the members of any child teams when assigning.
`notifyTeam` (`Boolean`)	Notify the entire team of the PR if it is delegated.
`removeTeamRequest` (`Boolean`)	Remove the team review request when assigning.
`teamMemberCount` (`Int`)	The number of team members to assign.

UpdateTeamsRepositoryInput

Autogenerated input type of UpdateTeamsRepository.

输入 `UpdateTeamsRepositoryInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`permission` (`RepositoryPermission!`)	Permission that should be granted to the teams.
`repositoryId` (`ID!`)	Repository ID being granted access to.
`teamIds` (`[ID!]!`)	A list of teams being granted access. Limit: 10.

UpdateTopicsInput

Autogenerated input type of UpdateTopics.

输入 `UpdateTopicsInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`repositoryId` (`ID!`)	The Node ID of the repository.
`topicNames` (`[String!]!`)	An array of topic names.

UpdateUserListInput

Autogenerated input type of UpdateUserList.

输入 `UpdateUserListInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`description` (`String`)	A description of the list.
`isPrivate` (`Boolean`)	Whether or not the list is private.
`listId` (`ID!`)	The ID of the list to update.
`name` (`String`)	The name of the list.

UpdateUserListsForItemInput

Autogenerated input type of UpdateUserListsForItem.

输入 `UpdateUserListsForItemInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`itemId` (`ID!`)	The item to add to the list.
`listIds` (`[ID!]!`)	The lists to which this item should belong.
`suggestedListIds` (`[ID!]`)	The suggested lists to create and add this item to.

UserStatusOrder

Ordering options for user status connections.

输入 `UserStatusOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`UserStatusOrderField!`)	The field to order user statuses by.

VerifiableDomainOrder

Ordering options for verifiable domain connections.

输入 `VerifiableDomainOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The ordering direction.
`field` (`VerifiableDomainOrderField!`)	The field to order verifiable domains by.

VerifyVerifiableDomainInput

Autogenerated input type of VerifyVerifiableDomain.

输入 `VerifyVerifiableDomainInput` 字段

名称	说明
`clientMutationId` (`String`)	A unique identifier for the client performing the mutation.
`id` (`ID!`)	The ID of the verifiable domain to verify.

WorkflowFileReferenceInput

A workflow that must run for this rule to pass.

输入 `WorkflowFileReferenceInput` 字段

名称	说明
`path` (`String!`)	The path to the workflow file.
`ref` (`String`)	The ref (branch or tag) of the workflow file to use.
`repositoryId` (`Int!`)	The ID of the repository where the workflow is defined.
`sha` (`String`)	The commit SHA of the workflow file to use.

WorkflowRunOrder

Ways in which lists of workflow runs can be ordered upon return.

输入 `WorkflowRunOrder` 字段

名称	说明
`direction` (`OrderDirection!`)	The direction in which to order workflow runs by the specified field.
`field` (`WorkflowRunOrderField!`)	The field by which to order workflows.

WorkflowsParametersInput

Require all changes made to a targeted branch to pass the specified workflows before they can be merged.

输入 `WorkflowsParametersInput` 字段

名称	说明
`doNotEnforceOnCreate` (`Boolean`)	Allow repositories and branches to be created if a check would otherwise prohibit it.
`workflows` (`[WorkflowFileReferenceInput!]!`)	Workflows that must pass for this rule to pass.

输入对象

本文内容

输入 AbortQueuedMigrationsInput 字段

输入 AbortRepositoryMigrationInput 字段

输入 AddAssigneesToAssignableInput 字段

输入 AddCommentInput 字段

输入 AddDiscussionCommentInput 字段

输入 AddDiscussionPollVoteInput 字段

输入 AddEnterpriseAdminInput 字段

输入 AddEnterpriseOrganizationMemberInput 字段

输入 AddLabelsToLabelableInput 字段

输入 AddProjectCardInput 字段

输入 AddProjectColumnInput 字段

输入 AddProjectV2DraftIssueInput 字段

输入 AddProjectV2ItemByIdInput 字段

输入 AddPullRequestReviewCommentInput 字段

输入 AddPullRequestReviewInput 字段

输入 AddPullRequestReviewThreadInput 字段

输入 AddPullRequestReviewThreadReplyInput 字段

输入 AddReactionInput 字段

输入 AddStarInput 字段

输入 AddUpvoteInput 字段

输入 AddVerifiableDomainInput 字段

输入 ApproveDeploymentsInput 字段

输入 ApproveVerifiableDomainInput 字段

输入 ArchiveProjectV2ItemInput 字段

输入 ArchiveRepositoryInput 字段

输入 AuditLogOrder 字段

输入 BranchNamePatternParametersInput 字段

输入 ChangeUserStatusInput 字段

输入 CheckAnnotationData 字段

输入 CheckAnnotationRange 字段

输入 CheckRunAction 字段

输入 CheckRunFilter 字段

输入 CheckRunOutput 字段

输入 CheckRunOutputImage 字段

输入 CheckSuiteAutoTriggerPreference 字段

输入 CheckSuiteFilter 字段

输入 ClearLabelsFromLabelableInput 字段

输入 ClearProjectV2ItemFieldValueInput 字段

输入 CloneProjectInput 字段

输入 CloneTemplateRepositoryInput 字段

输入 CloseDiscussionInput 字段

输入 CloseIssueInput 字段

输入 ClosePullRequestInput 字段

输入 CodeScanningParametersInput 字段

输入 CodeScanningToolInput 字段

输入 CommitAuthor 字段

输入 CommitAuthorEmailPatternParametersInput 字段

输入 CommitContributionOrder 字段

输入 CommitMessage 字段

输入 CommitMessagePatternParametersInput 字段

输入 CommittableBranch 字段

输入 CommitterEmailPatternParametersInput 字段

输入 ContributionOrder 字段

输入 ConvertProjectCardNoteToIssueInput 字段

输入 ConvertProjectV2DraftIssueItemToIssueInput 字段

输入 ConvertPullRequestToDraftInput 字段

输入 CopyProjectV2Input 字段

输入 CreateAttributionInvitationInput 字段

输入 CreateBranchProtectionRuleInput 字段

输入 CreateCheckRunInput 字段

输入 CreateCheckSuiteInput 字段

输入 CreateCommitOnBranchInput 字段

输入 CreateDeploymentInput 字段

输入 CreateDeploymentStatusInput 字段

输入 CreateDiscussionInput 字段

输入 CreateEnterpriseOrganizationInput 字段

输入 CreateEnvironmentInput 字段

输入 CreateIpAllowListEntryInput 字段

输入 CreateIssueInput 字段

输入 CreateLabelInput 字段

输入 CreateLinkedBranchInput 字段

输入 CreateMigrationSourceInput 字段

输入 CreateProjectInput 字段