エンタープライズ課金用の REST API エンドポイント

Get GitHub Actions billing for an enterprise

Gets the summary of the free and paid GitHub Actions minutes used.

Paid minutes only apply to workflows in private repositories that use GitHub-hosted runners. Minutes used is listed for each GitHub-hosted runner operating system. Any job re-runs are also included in the usage. The usage does not include the multiplier for macOS and Windows runners and is not rounded up to the nearest whole minute. For more information, see "Managing billing for GitHub Actions".

The authenticated user must be an enterprise admin.

"Get GitHub Actions billing for an enterprise" のきめ細かいアクセストークン

このエンドポイントは、次の粒度の細かいトークンの種類で動作します:

粒度の細かいトークンには次のアクセス許可セットが設定されている必要があります:

"Enterprise administration" business permissions (write)

"Get GitHub Actions billing for an enterprise" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

"Get GitHub Actions billing for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	OK

"Get GitHub Actions billing for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/actions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/actions

Response

Status: 200

{
  "total_minutes_used": 305,
  "total_paid_minutes_used": 0,
  "included_minutes": 3000,
  "minutes_used_breakdown": {
    "UBUNTU": 205,
    "MACOS": 10,
    "WINDOWS": 90
  }
}

Get GitHub Advanced Security active committers for an enterprise

Gets the GitHub Advanced Security active committers for an enterprise per repository.

Each distinct user login across all repositories is counted as a single Advanced Security seat, so the total_advanced_security_committers is not the sum of active_users for each repository.

The total number of repositories with committer information is tracked by the total_count field.

"Get GitHub Advanced Security active committers for an enterprise" のきめ細かいアクセストークン

このエンドポイントは、次の粒度の細かいトークンの種類で動作します:

粒度の細かいトークンには次のアクセス許可セットが設定されている必要があります:

"Enterprise administration" business permissions (write)

"Get GitHub Advanced Security active committers for an enterprise" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

クエリパラメーター
名前, Type, 説明
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`

"Get GitHub Advanced Security active committers for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	Success

"Get GitHub Advanced Security active committers for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/advanced-security

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/advanced-security

Success

Status: 200

{
  "total_advanced_security_committers": 2,
  "total_count": 2,
  "maximum_advanced_security_committers": 4,
  "purchased_advanced_security_committers": 4,
  "repositories": [
    {
      "name": "octocat-org/Hello-World",
      "advanced_security_committers": 2,
      "advanced_security_committers_breakdown": [
        {
          "user_login": "octocat",
          "last_pushed_date": "2021-11-03",
          "last_pushed_email": "octocat@github.com"
        },
        {
          "user_login": "octokitten",
          "last_pushed_date": "2021-10-25",
          "last_pushed_email": "octokitten@github.com"
        }
      ]
    },
    {
      "name": "octocat-org/server",
      "advanced_security_committers": 1,
      "advanced_security_committers_breakdown": [
        {
          "user_login": "octokitten",
          "last_pushed_date": "2021-10-26",
          "last_pushed_email": "octokitten@github.com"
        }
      ]
    }
  ]
}

Get all cost centers for an enterprise

Gets a list of all the cost centers for an enterprise.

"Get all cost centers for an enterprise" のきめ細かいアクセストークン

このエンドポイントは、GitHub アプリのユーザーアクセストークン、GitHub アプリのインストールアクセストークン、またはきめ細かい個人用アクセストークンでは機能しません。

"Get all cost centers for an enterprise" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

"Get all cost centers for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	Response when getting cost centers
`400`	Bad Request
`403`	Forbidden
`500`	Internal Error
`503`	Service unavailable

"Get all cost centers for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/cost-centers

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/cost-centers

Response when getting cost centers

Status: 200

{
  "costCenters": [
    {
      "id": "2eeb8ffe-6903-11ee-8c99-0242ac120002",
      "name": "Cost Center Name",
      "resources": [
        {
          "type": "User",
          "name": "Monalisa"
        }
      ]
    }
  ]
}

Add users to a cost center

Adds users to a cost center.

The usage for the users will be charged to the cost center's budget. The authenticated user must be an enterprise admin in order to use this endpoint.

"Add users to a cost center" のきめ細かいアクセストークン

このエンドポイントは、GitHub アプリのユーザーアクセストークン、GitHub アプリのインストールアクセストークン、またはきめ細かい個人用アクセストークンでは機能しません。

"Add users to a cost center" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.
`cost_center_id` string 必須 The ID corresponding to the cost center.

本文のパラメーター
名前, Type, 説明
`users` array of strings 必須 The usernames of the users to add to the cost center.

"Add users to a cost center" の HTTP 応答状態コード

状態コード	説明
`200`	Response when adding resources to a cost center
`400`	Bad Request
`403`	Forbidden
`409`	Conflict
`500`	Internal Error
`503`	Service unavailable

"Add users to a cost center" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

post/enterprises/{enterprise}/settings/billing/cost-centers/{cost_center_id}/resource

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/cost-centers/COST_CENTER_ID/resource \
  -d '{"users":["monalisa"]}'

Response when adding resources to a cost center

Status: 200

{
  "message": "Resources successfully added to the cost center."
}

Remove users from a cost center

Remove users from a cost center.

The usage for the users will no longer be charged to the cost center's budget. The authenticated user must be an enterprise admin in order to use this endpoint.

"Remove users from a cost center" のきめ細かいアクセストークン

このエンドポイントは、GitHub アプリのユーザーアクセストークン、GitHub アプリのインストールアクセストークン、またはきめ細かい個人用アクセストークンでは機能しません。

"Remove users from a cost center" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.
`cost_center_id` string 必須 The ID corresponding to the cost center.

本文のパラメーター
名前, Type, 説明
`users` array of strings 必須 The usernames of the users to remove from the cost center.

"Remove users from a cost center" の HTTP 応答状態コード

状態コード	説明
`200`	Response when removing resources from a cost center
`400`	Bad Request
`403`	Forbidden
`500`	Internal Error
`503`	Service unavailable

"Remove users from a cost center" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

delete/enterprises/{enterprise}/settings/billing/cost-centers/{cost_center_id}/resource

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/cost-centers/COST_CENTER_ID/resource \
  -d '{"users":["monalisa"]}'

Response when removing resources from a cost center

Status: 200

{
  "message": "Resources successfully removed from the cost center."
}

Get GitHub Packages billing for an enterprise

Gets the free and paid storage used for GitHub Packages in gigabytes.

Paid minutes only apply to packages stored for private repositories. For more information, see "Managing billing for GitHub Packages."

The authenticated user must be an enterprise admin.

"Get GitHub Packages billing for an enterprise" のきめ細かいアクセストークン

このエンドポイントは、次の粒度の細かいトークンの種類で動作します:

粒度の細かいトークンには次のアクセス許可セットが設定されている必要があります:

"Enterprise administration" business permissions (write)

"Get GitHub Packages billing for an enterprise" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

"Get GitHub Packages billing for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	OK

"Get GitHub Packages billing for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/packages

Response

Status: 200

{
  "total_gigabytes_bandwidth_used": 50,
  "total_paid_gigabytes_bandwidth_used": 40,
  "included_gigabytes_bandwidth": 10
}

Get shared storage billing for an enterprise

Gets the estimated paid and estimated total storage used for GitHub Actions and GitHub Packages.

Paid minutes only apply to packages stored for private repositories. For more information, see "Managing billing for GitHub Packages."

The authenticated user must be an enterprise admin.

"Get shared storage billing for an enterprise" のきめ細かいアクセストークン

このエンドポイントは、次の粒度の細かいトークンの種類で動作します:

粒度の細かいトークンには次のアクセス許可セットが設定されている必要があります:

"Enterprise administration" business permissions (write)

"Get shared storage billing for an enterprise" のパラメーター

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

"Get shared storage billing for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	OK

"Get shared storage billing for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/shared-storage

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/shared-storage

Response

Status: 200

{
  "days_left_in_billing_cycle": 20,
  "estimated_paid_storage_for_month": 15,
  "estimated_storage_for_month": 40
}

ヘッダー
名前, Type, 説明
`accept` string Setting to `application/vnd.github+json` is recommended.

パスパラメーター
名前, Type, 説明
`enterprise` string 必須 The slug version of the enterprise name. You can also substitute this value with the enterprise id.

クエリパラメーター
名前, Type, 説明
`year` integer If specified, only return results for a single year. The value of `year` is an integer with four digits representing a year. For example, `2024`. Default value is the current year.
`month` integer If specified, only return results for a single month. The value of `month` is an integer between `1` and `12`.
`day` integer If specified, only return results for a single day. The value of `day` is an integer between `1` and `31`.
`hour` integer If specified, only return results for a single hour. The value of `hour` is an integer between `0` and `23`.
`cost_center_id` string The ID corresponding to a cost center. The default value is no cost center.

"Get billing usage report for an enterprise" の HTTP 応答状態コード

状態コード	説明
`200`	Response when getting a billing usage report
`400`	Bad Request
`403`	Forbidden
`500`	Internal Error
`503`	Service unavailable

"Get billing usage report for an enterprise" のコードサンプル

GHE.com で GitHub にアクセスする場合は、api.github.com を api.SUBDOMAIN.ghe.com にあるエンタープライズの専用サブドメインに置き換えます。

要求の例

get/enterprises/{enterprise}/settings/billing/usage

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/enterprises/ENTERPRISE/settings/billing/usage

Response when getting a billing usage report

Status: 200

{
  "usageItems": [
    {
      "date": "2023-08-01",
      "product": "Actions",
      "sku": "Actions Linux",
      "quantity": 100,
      "unitType": "minutes",
      "pricePerUnit": 0.008,
      "grossAmount": 0.8,
      "discountAmount": 0,
      "netAmount": 0.8,
      "organizationName": "GitHub",
      "repositoryName": "github/example"
    }
  ]
}