Skip to main content

Esta versión de GitHub Enterprise Server se discontinuó el 2024-07-09. No se realizarán lanzamientos de patch, ni siquiera para problemas de seguridad críticos. Para obtener rendimiento mejorado, seguridad mejorada y nuevas características, actualice a la versión más reciente de GitHub Enterprise Server. Para obtener ayuda con la actualización, póngase en contacto con el soporte técnico de GitHub Enterprise.

Supervisión del estado del clúster

Para garantizar el rendimiento y la redundancia de un clúster de GitHub Enterprise Server, puedes supervisar el estado del clúster.

¿Quién puede utilizar esta característica?

GitHub determina la idoneidad para la agrupación en clústeres y debe habilitar la configuración de la licencia de la instancia. La agrupación en clústeres conlleva una planeación cuidadosa y una sobrecarga administrativa adicional. Para obtener más información, vea «Acerca de las agrupaciones».

About GitHub Enterprise Server cluster health

A GitHub Enterprise Server cluster comprises multiple nodes, with redundant services distributed across two or more nodes. If an individual service or an entire node fails, users should not notice. Failures affect performance and redundancy, so it's important to monitor the health of your cluster. You can monitor the health of your cluster using a command-line utility or an external monitoring tool like Nagios.

You can also monitor the health of individual nodes using Node Eligibility Service. For more information, see "Monitoring the health of your cluster nodes with Node Eligibility Service."

Manually checking cluster status

GitHub Enterprise Server has a built-in command line utility for monitoring the health of the cluster. From the administrative shell, running the ghe-cluster-status command executes a series of health checks on each node including verification of connectivity and service status. The output shows all test results including the text ok or error. For example, to only display failing tests, run:

admin@ghe-data-node-0:~$ ghe-cluster-status | grep error
> mysql-replication ghe-data-node-0: error Stopped
> mysql cluster: error

Note: If there are no failing tests, this command produces no output. This indicates the cluster is healthy.

Monitoring cluster status with Nagios

You can configure Nagios to monitor GitHub Enterprise Server. In addition to monitoring basic connectivity to each of the cluster nodes, you can check the cluster status by configuring Nagios to use the ghe-cluster-status -n command. This returns output in a format that Nagios understands.

Prerequisites

  • Linux host running Nagios.
  • Network access to the GitHub Enterprise Server cluster.

Configuring the Nagios host

  1. Generate an SSH key with a blank passphrase. Nagios uses this to authenticate to the GitHub Enterprise Server cluster.

    nagiosuser@nagios:~$ ssh-keygen -t ed25519
    > Generating public/private ed25519 key pair.
    > Enter file in which to save the key (/home/nagiosuser/.ssh/id_ed25519):
    > Enter passphrase (empty for no passphrase): LEAVE BLANK BY PRESSING ENTER
    > Enter same passphrase again: PRESS ENTER AGAIN
    > Your identification has been saved in /home/nagiosuser/.ssh/id_ed25519.
    > Your public key has been saved in /home/nagiosuser/.ssh/id_ed25519.pub.
    

    Security Warning: An SSH key without a passphrase can pose a security risk if authorized for full access to a host. Limit this key's authorization to a single read-only command.

    Note: If you're using a distribution of Linux that doesn't support the Ed25519 algorithm, use the command:

    nagiosuser@nagios:~$ ssh-keygen -t rsa -b 4096
    
  2. Copy the private key (id_ed25519) to the nagios home folder and set the appropriate ownership.

    nagiosuser@nagios:~$ sudo cp .ssh/id_ed25519 /var/lib/nagios/.ssh/
    nagiosuser@nagios:~$ sudo chown nagios:nagios /var/lib/nagios/.ssh/id_ed25519
    
  3. To authorize the public key to run only the ghe-cluster-status -n command, use a command= prefix in the /data/user/common/authorized_keys file. From the administrative shell on any node, modify this file to add the public key generated in step 1. For example: command="/usr/local/bin/ghe-cluster-status -n" ssh-ed25519 AAAA....

  4. Validate and copy the configuration to each node in the cluster by running ghe-cluster-config-apply on the node where you modified the /data/user/common/authorized_keys file.

    admin@ghe-data-node-0:~$ ghe-cluster-config-apply
    > Validating configuration
    > ...
    > Finished cluster configuration
    
  5. To test that the Nagios plugin can successfully execute the command, run it interactively from Nagios host.

    nagiosuser@nagios:~$ /usr/lib/nagios/plugins/check_by_ssh -l admin -p 122 -H HOSTNAME -C "ghe-cluster-status -n" -t 30
    > OK - No errors detected
    
  6. Create a command definition in your Nagios configuration.

    Example definition

    define command {
         command_name    check_ssh_ghe_cluster
         command_line    $USER1$/check_by_ssh -H $HOSTADDRESS$ -C "ghe-cluster-status -n" -l admin -p 122 -t 30
    }
    
  7. Add this command to a service definition for a node in the GitHub Enterprise Server cluster.

    Example definition

    define host{
         use                     generic-host
         host_name               ghe-data-node-0
         alias                   ghe-data-node-0
         address                 10.11.17.180
         }
    
    define service{
           use                             generic-service
           host_name                       ghe-data-node-0
           service_description             GitHub Cluster Status
           check_command                   check_ssh_ghe_cluster
           }
    

After you add the definition to Nagios, the service check executes according to your configuration. You should be able to see the newly configured service in the Nagios web interface.