Building and testing Ruby

Introduction

This guide shows you how to create a continuous integration (CI) workflow that builds and tests a Ruby application. If your CI tests pass, you may want to deploy your code or publish a gem.

Prerequisites

We recommend that you have a basic understanding of Ruby, YAML, workflow configuration options, and how to create a workflow file. For more information, see:

• Learn GitHub Actions
• Ruby in 20 minutes

Starting with the Ruby workflow template

GitHub provides a Ruby workflow template that will work for most Ruby projects. For more information, see the Ruby workflow template.

To get started quickly, add the template to the .github/workflows directory of your repository. The workflow shown below assumes that the default branch for your repository is main.

# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.

name: Ruby

on:
  push:
    branches: [ main ]
  pull_request:
    branches: [ main ]

jobs:
  test:

    runs-on: ubuntu-latest

    steps:
      - uses: actions/checkout@v2
      - name: Set up Ruby
        uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
        with:
          ruby-version: 2.6
      - name: Install dependencies
        run: bundle install
      - name: Run tests
        run: bundle exec rake

Specifying the Ruby version

The easiest way to specify a Ruby version is by using the ruby/setup-ruby action provided by the Ruby organization on GitHub. The action adds any supported Ruby version to PATH for each job run in a workflow. For more information see, the ruby/setup-ruby.

Using Ruby's ruby/setup-ruby action is the recommended way of using Ruby with GitHub Actions because it ensures consistent behavior across different runners and different versions of Ruby.

The setup-ruby action takes a Ruby version as an input and configures that version on the runner.

steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
  with:
    ruby-version: 2.6 # Not needed with a .ruby-version file
- run: bundle install
- run: bundle exec rake

Alternatively, you can check a .ruby-version file into the root of your repository and setup-ruby will use the version defined in that file.

Testing with multiple versions of Ruby

You can add a matrix strategy to run your workflow with more than one version of Ruby. For example, you can test your code against the latest patch releases of versions 2.7, 2.6, and 2.5. The 'x' is a wildcard character that matches the latest patch release available for a version.

strategy:
  matrix:
    ruby-version: [2.7.x, 2.6.x, 2.5.x]

Each version of Ruby specified in the ruby-version array creates a job that runs the same steps. The ${{ matrix.ruby-version }} context is used to access the current job's version. For more information about matrix strategies and contexts, see "Workflow syntax for GitHub Actions" and "Contexts."

The full updated workflow with a matrix strategy could look like this:

# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.

name: Ruby CI

on:
  push:
    branches: [ main ]
  pull_request:
    branches: [ main ]

jobs:
  test:

    runs-on: ubuntu-latest

    strategy:
      matrix:
        ruby-version: [2.7.x, 2.6.x, 2.5.x]

    steps:
      - uses: actions/checkout@v2
      - name: Set up Ruby ${{ matrix.ruby-version }}
        uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
        with:
          ruby-version: ${{ matrix.ruby-version }}
      - name: Install dependencies
        run: bundle install
      - name: Run tests
        run: bundle exec rake

Installing dependencies with Bundler

The setup-ruby action will automatically install bundler for you. The version is determined by your gemfile.lock file. If no version is present in your lockfile, then the latest compatible version will be installed.

steps:
- uses: actions/checkout@v2
- uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
  with:
    ruby-version: 2.6
- run: bundle install

Caching dependencies

If you are using GitHub-hosted runners, the setup-ruby actions provides a method to automatically handle the caching of your gems between runs.

To enable caching, set the following.

steps:
- uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
    with:
      bundler-cache: true

This will configure bundler to install your gems to vendor/cache. For each successful run of your workflow, this folder will be cached by Actions and re-downloaded for subsequent workflow runs. A hash of your gemfile.lock and the Ruby version are used as the cache key. If you install any new gems, or change a version, the cache will be invalidated and bundler will do a fresh install.

Caching without setup-ruby

For greater control over caching, if you are using GitHub-hosted runners, you can use the actions/cache Action directly. For more information, see "Caching dependencies to speed up workflows."

steps:
- uses: actions/cache@v2
  with:
    path: vendor/bundle
    key: ${{ runner.os }}-gems-${{ hashFiles('**/Gemfile.lock') }}
    restore-keys: |
      ${{ runner.os }}-gems-
- name: Bundle install
  run: |
    bundle config path vendor/bundle
    bundle install --jobs 4 --retry 3

If you're using a matrix build, you will want to include the matrix variables in your cache key. For example, if you have a matrix strategy for different ruby versions (matrix.ruby-version) and different operating systems (matrix.os), your workflow steps might look like this:

steps:
- uses: actions/cache@v2
  with:
    path: vendor/bundle
    key: bundle-use-ruby-${{ matrix.os }}-${{ matrix.ruby-version }}-${{ hashFiles('**/Gemfile.lock') }}
    restore-keys: |
      bundle-use-ruby-${{ matrix.os }}-${{ matrix.ruby-version }}-
- name: Bundle install
  run: |
    bundle config path vendor/bundle
    bundle install --jobs 4 --retry 3

Matrix testing your code

The following example matrix tests all stable releases and head versions of MRI, JRuby and TruffleRuby on Ubuntu and macOS.

# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.

name: Matrix Testing

on:
  push:
    branches: [ main ]
  pull_request:
    branches: [ main ]

jobs:
  test:
    runs-on: ${{ matrix.os }}-latest
    strategy:
      fail-fast: false
      matrix:
        os: [ubuntu, macos]
        ruby: [2.5, 2.6, 2.7, head, debug, jruby, jruby-head, truffleruby, truffleruby-head]
    continue-on-error: ${{ endsWith(matrix.ruby, 'head') || matrix.ruby == 'debug' }}
    steps:
      - uses: actions/checkout@v2
      - uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
        with:
          ruby-version: ${{ matrix.ruby }}
      - run: bundle install
      - run: bundle exec rake

Linting your code

The following example installs rubocop and uses it to lint all files. For more information, see Rubocop. You can configure Rubocop to decide on the specific linting rules.

# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.

name: Linting

on: [push]

jobs:
  test:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v2
      - uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
        with:
          ruby-version: 2.6
      - run: bundle install
      - name: Rubocop
        run: rubocop

Publishing Gems

You can configure your workflow to publish your Ruby package to any package registry you'd like when your CI tests pass.

You can store any access tokens or credentials needed to publish your package using repository secrets. The following example creates and publishes a package to GitHub Package Registry and RubyGems.

# This workflow uses actions that are not certified by GitHub.
# They are provided by a third-party and are governed by
# separate terms of service, privacy policy, and support
# documentation.

name: Ruby Gem

on:
  # Manually publish
  workflow_dispatch:
  # Alternatively, publish whenever changes are merged to the `main` branch.
  push:
    branches: [ main ]
  pull_request:
    branches: [ main ]

jobs:
  build:
    name: Build + Publish
    runs-on: ubuntu-latest

    steps:
      - uses: actions/checkout@v2
      - name: Set up Ruby 2.6
        uses: ruby/setup-ruby@477b21f02be01bcb8030d50f37cfec92bfa615b6
        with:
          ruby-version: 2.6
      - run: bundle install

      - name: Publish to GPR
        run: |
          mkdir -p $HOME/.gem
          touch $HOME/.gem/credentials
          chmod 0600 $HOME/.gem/credentials
          printf -- "---\n:github: ${GEM_HOST_API_KEY}\n" > $HOME/.gem/credentials
          gem build *.gemspec
          gem push --KEY github --host https://rubygems.pkg.github.com/${OWNER} *.gem
        env:
          GEM_HOST_API_KEY: "Bearer ${{secrets.GITHUB_TOKEN}}"
          OWNER: ${{ github.repository_owner }}

      - name: Publish to RubyGems
        run: |
          mkdir -p $HOME/.gem
          touch $HOME/.gem/credentials
          chmod 0600 $HOME/.gem/credentials
          printf -- "---\n:rubygems_api_key: ${GEM_HOST_API_KEY}\n" > $HOME/.gem/credentials
          gem build *.gemspec
          gem push *.gem
        env:
          GEM_HOST_API_KEY: "${{secrets.RUBYGEMS_AUTH_TOKEN}}"